Jump to content
SAU Community

Hks Gauges

Bl4cK32
 Share

Recommended Posts

Bl4cK32 Grand Master

Bl4cK32

Posted
Posted (edited)

I have 2 HKS 46mm mechanical gauges for sale.

Currently in my car, but will remove if purchased. They are 46mm in size - perfect fit for a single din size slot.

1 is a pressure gauge. It can be used for oil pressure, or hooked up to be used for fuel pressure. It comes with a t-piece (to screw into block where oil std oil sender is to use as oil pressure) or can be fitted to fuel line. It has the wiring for the back lighting, and all lines.

The other is a temperature gauge. It can be used for either oil (as i currently am) or for water. It screws into the sump plug slot, so no drilling of the sump is required to fit. It has all wiring, and lines included.

They are a silver colour background, with red lines and needle, with black numbers. Same gauge as shown below (one below is the temperature gauge)

hksgauge.jpg

I havent got a camera, but will try to organise pics for serious buyers.

I paid $125 each for these from BD4's less than a year ago. I still have the origional boxes etc, and will all be repacked upon sale.

I also have installation instructions for these as well.

Im after $100 ono for each gauge.

Edited by Bl4cK32
Link to comment
https://www.sau.com.au/forums/topic/109396-hks-gauges/
Share on other sites
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Chupapy
      Coolant leak?

      By Chupapy · Posted

      Will have a look at that. I cant see any leaks 
    • GTSBoy
      Coolant leak?

      By GTSBoy · Posted

      Put another overflow bottle (ie, a 1.25 coke bottle or similar) under the overflow hose and see if it is being pushed out there or if it is disappearing into the engine.
    • GTSBoy
      New kid on the block

      By GTSBoy · Posted

      Staring on a stand is no issue. You just have to wire everything up, give it fuel and cross your fingers that the stand is robust enough. Arranging the inlet plumbing is often the hardest part, without any surrounding structure to hand some of it from. No need for coolant if you only want to run it for <1 minute. As to the gearbox - I think the little Aisin box is a bit stronger than the other small Nissan boxes that went behind SRs, but I wouldn't be too keen to test its limits with the torque of a boosted 25. I don't know if you can retain the box and the tailshaft. The box won't connect to the RB without an adapter of some sort, which is either a plate that will push the engine forward (which is not good for fitting it into the bay's available space) or push the box back, which messes with the box position and tailshaft length - OR - cut and shut work on the bellhousing, which is a long way from "least modification". I'd be buying a new 370Z 6 speed or similar, doing what has to be done to that to make it fit RB (ie, cut and shut bellhousing) and the requisite tailshaft custom/mods.
    • Songo
      New kid on the block

      By Songo · Posted

      Hi Everyone I am from West Pennant Hills in NSW. Been too busy until recently to attend to my RB25DET Series 2 engine until recently. I am planning to stick it into the S15 shell at this stage, unless a nice SR20DET turns up... For now, i am going to try and get the RB25 running and working well then decide what gearbox to use. My preference is to retain the SR20DET  6 speed gearbox and tail shaft to retain as much and least modifications as i can avoid. I am an old guy and won't be doing any heavy drifting so i don't need a bullet proof gearbox Does anyone have experience with starting the RB on a stand? I got everything setup as much as I can with the info i can find... endless searching and videos on Youtube I would be great to get some pointers Cheers Songo
    • Chupapy
      Coolant leak?

      By Chupapy · Posted

      Hey all, Recently have had my s1 r33 gtr serviced and noticed my coolant reservoir was topped up to the max line. Took the car out for 1 yesterday and noticed today the reservoir is completely empty.  Any ideas? Radiator is full
×
×
  • Create New...