Jump to content
SAU Community

Recommended Posts

Im getting 4 new K104's put onto my Stagea this weekend, $800 all up fitted balanced etc, for 235/45/17's onto my new R34 GTT rims - Im in SA by the way.

How long (ie kms) would a set last for? My Stagea isnt a daily driver, and when driven is usually in high density areas..... ie city driving. The Stagea is a heavy car, around 1900kgs with me driving it and fully fuelled - so how much PSI should be in each tyre?

For such a heavy car the K104's are the wrong load rating.

U will need the K107's. Check with the tyre shop who is supplying them.

For such a heavy car the K104's are the wrong load rating.

U will need the K107's. Check with the tyre shop who is supplying them.

Oh? ok, I think the car is around 1650kgs standard. And I know that a Stagea driver in Melbourne is using these hankook 104 tyres on R34gtt rims at the moment and says they are fairly good.

Plus the 104's are load rating 97Y I believe, whereas the basic tyres on my car atm are 92Y load rating, and it was given a road worthy certificate (in Qld when I bought the car) based on these current Nankang tyres.

The K107's are 94Y rating... so what is best? low Y or high Y rating? from what I understand the higher the Y the bigger the load capacity per tyre, see http://www.michelin.com.au/tyres/tyreBasics_speedRating.asp

At the end of the day the Stagea weighs in similar to a VS wagon, or a Magna wagon, so Im sure the 97 rating is aok. Plus from what Ive read they are worth the cash, so Im getting them anyways (plus my budget is a max of $200 per tyre, for 'performance' tyres).

So..... what PSI should I have in the tyre?

Cheers for your information - Brendan

Edited by Tangles

I'd put them on.

I love them. I have travelled a lot of ks on my K104s.

They grip very well.

Tangles, you wont be dissappointed.

Especially considering the price.

If you are putting on 235 17s, let me know.

I'll get you a decent price over here in Mitcham.

BASS OUT

Cheers fellas (by the way Im in Adelaide, so Im not sure our Mitchem here near Unley is the place you mean Bass Junky).

http://www.hankooktyre.com.au/v2/products/...ch=uhpt&id=1088

K104's for 235/45/17 stated as 97Y

I already bargained the shop down a little in price; Im happy (sort-of) to fork out $800 for my first set of 17's provided they look phat on my porky-wagon, perform very well, good value for money, and last me a long time - I drive less than 8000kms per year.

The tread pattern seems fairly aggressive to me, and they have had good reviews here on SAU........... but it comes down to psi also at the end of the day, so that they perform and last well. I will slowly be adding SK's suspension parts over time, although I wont be lowering the car via springs/shocks. At this stage adding swaybars & castor, and will add subframe alignment kit & camber when I can afford to.

Cheers, Brendan

Edited by Tangles
about $185 each....

Good pricing.......

I probably could have rung around more places and got them slowly down a bit, but how far do you go?!

Im sure they will be worth every dollar..... I hope. Im thinking start off with 36psi in each tyre and see how they wear and handle.

Never had 17inch mags before, cant wait to see how the GTT rims & 235wide K104 tyres look on the swett-as Stagea RB25det-smokin station wagon. :happy:

Cheers to you all, go the Crows.

Brendan

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Finally have an update on this  Rack came in this week so I did a test fit. You do need the S chassis bushings since the rack is 5mm thinner than the R33 rack. The main issue I foresaw and ran into was one of the hardlines not lining up properly with there it's meant to on the rack. After some gentle coercing and bending very slightly, I managed to get it to fit without any kinks and keeping the hardline pretty much in all of the factory mounting positions. I did have to unbolt all of the soft mounts to move the line around so I could snake it out and bend it safely but it looks good to me for now. I'll update when the rack is fully bolted in and functioning.  
    • I hear this thread needs an update following its adventures last Wednesday!
    • What are you thinking makes a sequential shit to drive on the street? About the ONLY thing I can think of, is if you're wanting to be able to roll up to lights in third or second and pop it straight into neutral, or you want to come down two or three gears, say out of 5th and back to second, but they shift quick enough it doesn't really matter
    • I'm not a drag racing guy, but that was a good watch. Didn't Ibrahim's car have some cooch! But the big question is....WTF is with so many of them running without seatbelts!
    • Sequential Is fine to drive on the street
×
×
  • Create New...