Jump to content
SAU Community

Recommended Posts

Hey guys,

Just wondering how much you think second hand Trust suspension is worth? I will try to get some photos up tomorrow.

Heres a few details:

Came off a 1991 32 GTR.

Light blue in colour with darker blue springs.

Black knob with 1 - 8 on it (as you can tell im not a suspension know it all).

Appears to be no leaks.

They have the letters KYB and 2GI0.

I know the info is a little vag. but any help would be appreciated.

Cheers.

post-23674-1143001627.jpgpost-23674-1143001641.jpgpost-23674-1143001662.jpgpost-23674-1143001695.jpgpost-23674-1143001706.jpgpost-1777-1125302755.jpg

post-23674-1143001716.jpg

Edited by Extacy
Link to comment
https://www.sau.com.au/forums/topic/110562-looking-for-some-answers/
Share on other sites

KYB 2G is obviously the brand KYB by all accounts

AGX is the form you are describing with 8 way adjustable dial.. far too soft to be useful on lowest setting... decent at middle and you'll pretty much be driving around with it dialed in as hard as possible.

not sure where trust comes into it ... obviously with the info provided its a little unclear on all the bits.

KYB 2g AGX are used in some skylines but fairly rare so some pics would be great so verify my "beliefs" here.

if these are indeed what i suspect normal cost is around 230 a corner.

Danz

Edited by Danz-

KYB sell their shocks to all sorts of people who stick their own brand on them. Look for oil and gas leaks, compress fully and check the damping still works and that there is gas pressure. Shake and listen for rattles. KYB's are notorious for leaking and then falling apart internally.

:( Cheers :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...