Jump to content
SAU Community

Dynamat Extreme Bulk Kit - The Best Sound Deadener!

tyger

By tyger,
in For Sale (Other Items)

 Share

Recommended Posts

tyger Contributor

tyger

Posted
Posted

Hi,

I bought two brand new Dynamat Xtreme Bulk Paks for $299 my local car audio shop. I was planning to seriously sound deaden my whole car, but have since bought a new car and no longer need them.

They have never been opened and 1 kit will easily sound deaden your whole car. With Each kit containing Nine 45.7cm x 81.2cm pieces.

I am looking for $249 each or $239 each if you buy both. Pick up in Hills Area Sydney ok or willing to post $19 Aust Wide courier.

Please contact me on [email protected] or 0405 909 347.

d7.jpg

What Dynamat Says:

Apply Dynamat Xtreme to your vehicle's resonant surfaces and enjoy improved clarity, loudness and bass response from your car stereo.

High-performance Dynamat Xtreme is lighter than Dynamat Original, four times more effective and requires no heat to apply!

It is recommended for vehicle tops, sides and contoured areas. Dynamat Xtreme is coated with aluminum for high temperature areas such as firewalls and floors. Kit contains nine 18" x 32" pieces of Dynamat Xtreme for a total of about 36 square feet (a car door requires about 5 square feet).

Can be used for rear decks, doors, floors and boot floors. Unlike Dynamat Original, Dynamat Xtreme is also recommended for trunk lids, roofs, quarter panels and under-hood installations.

Designed especially for high-temperature areas and high sound pressure level situations, Dynamat Xtreme offers four times the damping power of Original Dynamat, thanks to its energy-reflective aluminum layer.

Dynamat Bulk Pak

Part Number: # 10455

Contents: (9) 18"x 32" (457mm x 812mm) pieces of Dynamat Xtreme

Application: Use on rear decks, doors, floors and the floor of your trunk to get more bass, more music, lower road noise and better sound.

tyger Contributor

tyger

Posted
  • Author
Posted

Guys?

Anyone interested???

$239 I gotta get rid of them. Huge saving off RRP and they're the best quality stuff you can buy.

Hi,

I bought two brand new Dynamat Xtreme Bulk Paks for $299 my local car audio shop. I was planning to seriously sound deaden my whole car, but have since bought a new car and no longer need them.

They have never been opened and 1 kit will easily sound deaden your whole car. With Each kit containing Nine 45.7cm x 81.2cm pieces.

I am looking for $249 each or $239 each if you buy both. Pick up in Hills Area Sydney ok or willing to post $19 Aust Wide courier.

Please contact me on [email protected] or 0405 909 347.

d7.jpg

What Dynamat Says:

Apply Dynamat Xtreme to your vehicle's resonant surfaces and enjoy improved clarity, loudness and bass response from your car stereo.

High-performance Dynamat Xtreme is lighter than Dynamat Original, four times more effective and requires no heat to apply!

It is recommended for vehicle tops, sides and contoured areas. Dynamat Xtreme is coated with aluminum for high temperature areas such as firewalls and floors. Kit contains nine 18" x 32" pieces of Dynamat Xtreme for a total of about 36 square feet (a car door requires about 5 square feet).

Can be used for rear decks, doors, floors and boot floors. Unlike Dynamat Original, Dynamat Xtreme is also recommended for trunk lids, roofs, quarter panels and under-hood installations.

Designed especially for high-temperature areas and high sound pressure level situations, Dynamat Xtreme offers four times the damping power of Original Dynamat, thanks to its energy-reflective aluminum layer.

Dynamat Bulk Pak

Part Number: # 10455

Contents: (9) 18"x 32" (457mm x 812mm) pieces of Dynamat Xtreme

Application: Use on rear decks, doors, floors and the floor of your trunk to get more bass, more music, lower road noise and better sound.

  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Duncan
      What accelerator cable can be used with greddy plenum

      By Duncan · Posted

      I was 99% sure the standard one is long enough to get there, you might just have to change the throttle orientation. If not, I remember someone having used an r31 cable instead, but that is probably harder to find than r33 by now...
    • V36
      What accelerator cable can be used with greddy plenum

      By V36 · Posted

      HELP   Hey all, Is there an accelerator cable from another Nissan that can be used on the R33 GTST RB25DET with a Greddy forward facing plenum?  Thanks in advance  Rob 
    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      Or do we think it was installed to give 1 bar of boost max, all day, everyday?
    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
×
×
  • Create New...