Jump to content
SAU Community

Recommended Posts

Mines is also underneath the steering wheel, behind the plastic facia/footwell - Cops and RTA have checked the car twice and did not find it. Note : Make sure you turn the car timer off at the same time you turn the car off so the cops don't wonder why your car is still running.

Tangles,

A turbo gets extreemley hot. Sometimes even glowing red.

Metal when it is hot should be cooled down gradually (on idle) not rapidley (turning car straight off).

Metal stretches and expands some what with heat and cooling it down to quick will make metal brittle, or crack, or worp.

Thats why my timer for example (apexi) is attached to the oxygen sensor. The more air that flows through it (eg. if your putting your foot down) the longer the automatic feature on the timer will keep the car on. I just set mine for a minimum of 30 sec and a max of 3 min, and the timer figures out how hard I have driven the car and sets accordingly.

Hope that helps

Yah I know matey, thats why I drive off-boost a few kms before I get home (usually, that is!) to give the stnd turbo some chance of cooling down, and if I have been on boost then I'll let the car idle for a short amount of time once in my garage.

Guess Im sort of trying to ruin the turbo - want a hiflow! LOL nah in all seriousness, I let it cool down but I dont leave the car running if Im not in it - my Stagea is our family wagon and I dont want my kiddies driving off in my car! Nor do I want to turn into FlameBoy at the local petrol station. :sick:

The timer thats in my car is a no-name Jap brand, and seems to want to make the car idle for 3mins, just seems dangerous to me, thats all.

Mate if you're worried about your kids driving off while the turbo timer is keeping the car running just get one with a handbrake safety feature. If the handbrake is released the car shuts off. Stops your car being stolen that way too.

My mate had a Greddy turbo timer installed in the ashtray in his R32. I thought that was a good spot.

Turbo timers can be useful if you're an impatient person but tangles has it right! The best turbo timer you can have is your self!

Before the flurry of posts come in, think about it. As well as the air flow over the engine/turbo what else cools the motor. . . . Correct. Oil and coolant, so you need air flow through the radiator for effective heat transfer. If you've just had a spirited run and you pull in and shut off - while your car sits idling it will only retain the heat or if your motor or fans viscous hub isn't in such good shape your engine will struggle to regulate temps. Where as if your controlled enough to drive sedately for the last few minutes of your drive, your engine will cool significantly quicker due to the increased heat transfer via the radiator. Those with an oil cooler are better off again.

And I have tested this with oil, water and exhaust temp gauges in my car

All that that said, If you drive hard and don't want to slow down before stopping than a turbo timer is better than nothing as the engine is hot but as I've seen from the exhaust temps, the turbo is much hotter and the run on period does disperse the heat to other parts of the motor slowly to bring turbo temps down.

Edited by ellie

I have a Apex'i pen timer and i dont even show it...on a 32 under your right knee is the fuse cover ive put it under that...no one can see it. I also used to have it mounted up my a'pillar and munted under the sun visor.

I got a Hks timer. Not exactly discreet but when I bought my car, it was installed in the din under my head unit. A real pain in the arse. The wires are drilled through the bottom, so I can't pull the console sorround off. Not a bad looking spot but.

If you want to go discreet, install it in the glove box or in the centre console.

  • 2 weeks later...

what did you guys use to stick it to the plastic parts of your dash?

Also, I know that being a meter away from your car with the engine running is illegal, but is having a turbo timer actually installed a defect?

Like if a policeman pulled me over and tried to defect me for having a turbo timer, couldn't I say, I sit in the car and only use it as a timing device and wait for the engine to cool down.. eg, you haven't actually seen me leaving the car with the turbo timer on and the engine running, and therefore cannont touch me??

I have the Greddy Full Auto Timer which is stuck onto the top of my steering column using double sided velcro tape.

The unit is black and when turned off blends into the column to a certain degree.

Don't really know whether or not it's totally necessary in terms of keeping my turbo alive but it did give me much more bottom end power and 25rwkw at peak :woot:

My turbo timer location is the same as my traction control device and my maximum power output limiter - in my head (i.e. a bit of basic common sense).

If you can't remember to cool down the turbo(s) by idling or driving off boost after giving them a flogging, then you shouldn't really be driving such cars.

Turbo timers also help thieves by offering clear and easy access to hot wiring cars. Finally, check with you insurance company about their opinion of turbo timers.

Just my 2C worth.

My turbo timer location is the same as my traction control device and my maximum power output limiter - in my head (i.e. a bit of basic common sense).

If you can't remember to cool down the turbo(s) by idling or driving off boost after giving them a flogging, then you shouldn't really be driving such cars.

Turbo timers also help thieves by offering clear and easy access to hot wiring cars. Finally, check with you insurance company about their opinion of turbo timers.

Just my 2C worth.

I remember them saying exactly the same thing in HPI.

Personally I think it's a bit silly to say that people shouldn't be driving turbo cars just because they use a turbo-timer.

I don't think it's a question of intelligence, I think it comes down to convenience.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all,   long time listener, first time caller   i was wondering if anyone can help me identify a transistor on the climate control unit board that decided to fry itself   I've circled it in the attached photo   any help would be appreciated
    • I mean, I got two VASS engineers to refuse to cert my own coilovers stating those very laws. Appendix B makes it pretty clear what it considers 'Variable Suspension' to be. In my lived experience they can't certify something that isn't actually in the list as something that requires certification. In the VASS engineering checklist they have to complete (LS3/NCOP11) and sign on there is nothing there. All the references inside NCOP11 state that if it's variable by the driver that height needs to maintain 100mm while the car is in motion. It states the car is lowered lowering blocks and other types of things are acceptable. Dialling out a shock is about as 'user adjustable' as changing any other suspension component lol. I wanted to have it signed off to dissuade HWP and RWC testers to state the suspension is legal to avoid having this discussion with them. The real problem is that Police and RWC/Pink/Blue slip people will say it needs engineering, and the engineers will state it doesn't need engineering. It is hugely irritating when aforementioned people get all "i know the rules mate feck off" when they don't, and the actual engineers are pleasant as all hell and do know the rules. Cars failing RWC for things that aren't listed in the RWC requirements is another thing here entirely!
    • I don't. I mean, mine's not a GTR, but it is a 32 with a lot of GTR stuff on it. But regardless, I typically buy from local suppliers. Getting stuff from Japan is seldom worth the pain. Buying from RHDJapan usually ends up in the final total of your basket being about double what you thought it would be, after all the bullshit fees and such are added on.
    • The hydrocarbon component of E10 can be shittier, and is in fact, shittier, than that used in normal 91RON fuel. That's because the octane boost provided by the ethanol allows them to use stuff that doesn't make the grade without the help. The 1c/L saving typically available on E10 is going to be massively overridden by the increased consumption caused by the ethanol and the crappier HC (ie the HCs will be less dense, meaning that there will definitely be less energy per unit volume than for more dense HCs). That is one of the reasons why P98 will return better fuel consumption than 91 does, even with the ignition timing completely fixed. There is more energy per unit volume because the HCs used in 98 are higher density than in the lawnmower fuel.
    • No, I'd suggest that that is the checklist for pneumatic/hydraulic adjustable systems. I would say, based on my years of reading and complying with Australian Standards and similar regulations, that the narrow interpretation of Clause 3.2 b would be the preferred/expected/intended one, by the author, and those using the standard. Wishful thinking need not apply.
×
×
  • Create New...