Jump to content
SAU Community

Recommended Posts

Item: Nissan S12 Gazelle

Location: Ipswich

Website: None

Reason for Selling: Moving onto bigger and better

Price and Payment Conditions: $7000

Extra Info:

Engine:

#RB20DET silver top

#HKS 25/30 turbo

#Hybrid FMIC, mandrel bent aluminum plumbing

#K&N filter

#3inch exhaust from turbo back, cannon muffler

#Customer PWR cross flow radiator with header tank

#Walbro 550hp in-tank pump

Driveline:

#R32 GTS-t 5speed manual

#NPC heavy duty 3200lbs organic clutch

#Custom 1 piece tailshaft

#Gtir LSD installed

#Tomei short shifter

#Volk 16x7 and 16x8 wheels (small dish)

Brakes & Suspension

#Power steering

#R32 GTS-t 4 piston brakes

#S13 front lower control arms

#S13 front hubs

#S13 JIC front coilovers (rebuilt)

#Kmac Z31 rear springs (300lbs 70mm lowered)

#Es9000 hilux 4x4 rear shocks

#Adjustable castor rods

#Cefiro front sway bar

#Poly rear subfame bushes

#Poly rear control arm bushes

#Poly castor rod bushes

#Poly front control arm bushes

#Customer rear subframe capable of 0deg camber with lowered springs

Interior:

#Jap drift steering wheel (white with green glitter)

#Alloy shift knob

#Jbl speakers

#Battery mounted in boot

Pictures: Will get more pictures on request

Contact Details: Post here or call 0403 373 911

Email: [email protected]

post-103-1145777517130191429.jpgpost-103-11457775481003077327.jpgpost-103-1145777579535867952.jpg

Link to comment
https://www.sau.com.au/forums/topic/114651-rb20det-s12-bne/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...