Jump to content
SAU Community

Recommended Posts

yes yes, but no no, not really, its the same difference, but DOTARS would be the place to go, they issue the import licences.

Apollogies to Ska for plagiarism.

Edited by 66yostagea
yes yes, but no no, not really, its the same difference, but DOTARS would be the place to go, they issue the import licences.

Apollogies to Ska for plagiarism.

he he he raws/dotars/sevs/etc you all know what i meant :D

ok guys and gals. just a little mike survey here lol

how many stageas are ther in the land of oz

Simple, there are 4 licence holders, they each get 100 licenses every year, this is the third year with Stageas on the list. So ;

4 X 100 X 3 = 1200

:no: cheers :)

Simple, there are 4 licence holders, they each get 100 licenses every year, this is the third year with Stageas on the list. So ;

4 X 100 X 3 = 1200

:) cheers :rolleyes:

the 4 licence holder also have other cars on there raws and the maximum you can comply is a 100 total split between all models on there schedule ...i doubt if any compliance holder has done 100 per year of 1 car ..nizmo for example have 32/33/34 /35 and stagea and total allocation is 100

my information is that approx 200 stagea`s(end of 2005) have been complied under raws scheme

the 4 licence holder also have other cars on there raws and the maximum you can comply is a 100 total split between all models on there schedule ...i doubt if any compliance holder has done 100 per year of 1 car ..nizmo for example have 32/33/34 /35 and stagea and total allocation is 100

my information is that approx 200 stagea`s(end of 2005) have been complied under raws scheme

Hmm, when I asked Ernie to comply my Stagea in May 2004 he told me he had almost exhausted his quota of Stageas. At the same time I spoke to 2 other Stagea compliers and they both had used all of their allocation. At the time I took that to mean they had done their 100 Stageas, otherwise they could have simply transferred from other cars to Stageas. Which would have made good business sense as Stagea compliance at the time was more expensive than any of the Skyline models.

:P cheers :P

"Hmm, when I asked Ernie to comply my Stagea in May 2004 he told me he had almost exhausted his quota of Stageas."

go to here..raws

put your plate # in ...change the last 3 # till it dosen`t exist and you will find out how many cars have been complied by the raws who complied your own car

nizmo have complied 114 stageas total in three years according to dotars

and three others have complied 173 in total and 1 by newest plate holder

so the total complied according to dotars is 288

I swear they must all be in W.A ... I am starting to see them everywhere over here, used to be once in a blue moon I would see one, now I see on average 1 or 2 a week....

As for compliance, I think you will find they are still making more doing Stagea's then skyline's... we are paying through the nose to do compliance on ours....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hopefully it ends up being something manageable, like a hone, rather than a full bore—it would be a huge relief if it’s not as bad as it looks. Hang in there; these setbacks are annoying, but it sounds like you’re handling it as smartly as possible.
    • At the end of the day, it’s all about understanding the odds and being comfortable with the potential cost, whether it’s horsepower on a build or chips on a roulette table. And I have to say, the Laine example made me laugh—some people really do embrace that carefree, “roll and see” attitude!
    • Thanks MBS206, i got that PDF but got abit overhelm with all the connections and tracing of wires. I wasn't expecting to plug the dash harness anywhere. i was just going to use my electronics jumper wires to plug into the right pins like ECU power, ecu ground, ignition trigger etc... I do have a few ratchet straps locking it down tight. Fire extinguisher ready and only a small amount of fuel at a time, enough to submerge the pump.
    • Thanks GTSBoy, i will do abit more digging. I am missing a blue relay near the ECU connector... so i will chase that up in the next few days as well  
    • https://yariksteel.ru/manual/R33/Skyline_R33_elektroprovodka.pdf   Page 18 should be what you want for the Dash Cluster wiring. Though, you don't need the dash plugged in to get the motor running. What you want is power as how GTSBoy said. You need to power the ECU. Find in the above link the ECU pin outs (Verify them before just connecting them up from things written on the internet). Find anything needing power, give it power, find anything needing ground, give it ground. Then give the starter motor power through a big cable, and bridge the solenoid on the starter straight to power too.  ECU will be on, and when you give the starter power, it'll spin the starter motor, and it should start. I also hope you have a proper stand, and not just the engine sitting on some wood. You will want it bolted down properly.
×
×
  • Create New...