Jump to content
SAU Community

Recommended Posts

my car has bad picked up a pinging when it goes past 4500RPM

I use BP ultimate in it, i have had it to a local workshop who had it all day and said it will have to go back when they can figure out what is causing it

They believe if anything it may be an aftermarket 02 sensor that isn't working with the standard ECU, anyone got any other ideas what may be happening as it started it out of the blue one day while driving to work.

Link to comment
https://www.sau.com.au/forums/topic/119787-pinging-at-4500rpm/
Share on other sites

nah i haven't done anything to it yet. As far as i was concerned when i bought it, it was all stock standard except the HKS airfilter now i find out it has a aftermarket turbo dump and oxygen sensor. they checked all the mixtures and said that they were all correct

could be a bad batch of fuel. try some good octane boost like nulon pro strength. if that solves it then wait and see if it still does it on the next tank of fuel. if it still does it then get it looked it, if it doesn't come back even after a few more tanks of fuel then it was just a bad batch. and make sure you don't put too much octane boost in as it can actually lower the octane.

mate of mine is a mechanic and he had the nulon rep come through work and he was asking him about the octane boost. the rep had an octane tester with him so they did some tests. at 50% strength it went by only about 2ron, at full strenght it went up by 6ron, and at double strength it dropped by 4ron.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...