Jump to content
SAU Community

Recommended Posts

Hi Guys!

After putting up with squeaking suspension since I got the car, I decided to find out what the problem is so I thought I would pay $14 and get pedders to tell me

I never intended to have them repair it as they charge like a wounded bull and once I saw the $1700 price tag it made laugh!

I have had a look around the place but have not really found anywhere and hoped someone would be able to point me in the right direction or give some advice as to my options.

I am looking at spending no more than $1000 and would like to lower it at the same time. (R32 GTS-t) I will be buying eveything I need and then either fitting it myself or if I am too lazy, I will get someone (for a few cartons) to fit it for me...

This is the list of what I need.

-Shocks - front, but I will do all (peferably something with above standard performance - but it wont be a race car)

-Lowered springs

-Sway bar bushes

-Upper bushes

-Lower bushes

-Radius bushes

-Bump stops

I have the option of getting some super low king springs on Apexi damper adjustable shocks in good condition for $500 so that may be a good option for that but where do I go for the bushes ect?

Thanks for any help or advice!!

Edited by CATKICKER

hi

i went into pedders yesterday with my gtst and asked about lowering it. one of my work mates is partly sponsored by them so they look after him. anyway they offered 45mm lowered springs with 20 to 25% stiffer springs for $130 a pair. all up $260 if you cant multiply. they said they are the best setup for all conditions. plenty of R and D has gone into them. we measured it up and the gards will sit just right with about 25 to 30mm wheel clearance.

thats just my opinion. i have also looked at a set of tein lowered springs from japan. 45mm lower and about 4 to 5Kgf/mm spring rate. they were about $200 but once you add shipping from japan you might as well buy local and if you dont suport it the prices wont come down.

from other research i have done whiteline seem to offer good stuff at reasonable prices. not sure how many bushes they do apart from pineapples.

whiteline can be surced through a few local places like autobarn.

just what i have found hope it helps.

Also i wouldnt recomend buying seccond hand coilovers as you get what you pay for and if there cheap than there cheap for a reason. and i dont think that they are cheap to rebiuld.

but if you have a drift pig that you only drive on the weekend then i wouldnt worry about seccond hand coilovers but if you drive lots (to work most days) then you are only gonna wear them out.

just sme more useles advice.

i went into pedders yesterday with my gtst and asked about lowering it. one of my work mates is partly sponsored by them so they look after him. anyway they offered 45mm lowered springs with 20 to 25% stiffer springs for $130 a pair. all up $260 if you cant multiply. they said they are the best setup for all conditions. plenty of R and D has gone into them. we measured it up and the gards will sit just right with about 25 to 30mm wheel clearance.

Ahahaha...R&D....Pedders....I wouldn't put those terms in the same sentence. I'd maybe use them for bushes and balljoints and so forth, never for actual critical suspension components.

I had a full pedders sportsrider package in my old R31; undersprung, overdamped in initial bump, underdamped for mid stroke and bottoming resistance, too slow in rebound...

Absolutely terrible, car crashed over the top of small bumps, slammed throught the travel on larger ones, couldn't react quickly for undulations in the road (i.e. where the surface dips after a bump it would hang a wheel in the air), turned in nicely enough but then flopped into mid corner roll understeer/scary roll oversteer... In short very very badly put together package.

I would never put their off the shelf dampers and springs anywhere near a car of mine that I wanted to handle.

Bear in mind too that you really won't get any handling advantage out of just lowered off the shelf springs; they are just stiff enough to maintain travel at the lower rideheight comparable to stock and really won't induce any useful improvement.

Coilovers are cheap enough new that its hardly worth buying secondhand, and definitely not worth dropping ~750 or so on non adjustable monroe/pedders/gabriel crap.

Edited by floody
Also i wouldnt recomend buying seccond hand coilovers as you get what you pay for and if there cheap than there cheap for a reason. and i dont think that they are cheap to rebiuld.

but if you have a drift pig that you only drive on the weekend then i wouldnt worry about seccond hand coilovers but if you drive lots (to work most days) then you are only gonna wear them out.

just sme more useles advice.

The reason these particular coil overs are cheap is because I wanted height adjustable suspension as my car is going to be used for alot of trackwork and the Apexi that was installed on my car when I bought it did not offer the range of adjustment I needed...if it was to be a road car only I would have stayed with the current set up...further more I am offering these coil overs cheap to Todd because I have indirectly screwed him around with the proposed sale of this suspension gear and I feel quite bad about it....Please dont make out that all second hand gear is rubbish...especially when you dont know the background

well I have second hand Tein coil overs in my skyline for about 3 years now and havn't had a problem with them. for $1200 three years ago they were cheap! thats postage to tassie too!

anyway sometimes second hand coilovers are ok......made a huge difference to the cars set up. :PBJ:

Also i wouldnt recomend buying seccond hand coilovers as you get what you pay for and if there cheap than there cheap for a reason. and i dont think that they are cheap to rebiuld.

but if you have a drift pig that you only drive on the weekend then i wouldnt worry about seccond hand coilovers but if you drive lots (to work most days) then you are only gonna wear them out.

just sme more useles advice.

sorry bunta i did in no way want to steer him away from yours it is just my opinion so i voiced it.

todd did ask if any one could give him advice on what he could get and i was only telling him what i know.

id also ask your self how often you will be atending the track because i know a few people that are like wow i have fully adjustable coilovers but i wouldnt know jack on how to change anything let alone what that would do to it.

anyway i got my pedders springs today and we put the front ones in in about 20mins. its so easy. 3 bolts and away you go. they are cheap and will do the job on my car untill it becomes worth while getting coilovers. its lowered it onto the wheels nicely but i havent realy given them a trial yet. once i do ill post some pics and my findings. the best thing is i still have a firm but comftable ride and i can get over speed humps easy as.

just another option!

sorry bunta i did in no way want to steer him away from yours it is just my opinion so i voiced it.

todd did ask if any one could give him advice on what he could get and i was only telling him what i know.

id also ask your self how often you will be atending the track because i know a few people that are like wow i have fully adjustable coilovers but i wouldnt know jack on how to change anything let alone what that would do to it.

anyway i got my pedders springs today and we put the front ones in in about 20mins. its so easy. 3 bolts and away you go. they are cheap and will do the job on my car untill it becomes worth while getting coilovers. its lowered it onto the wheels nicely but i havent realy given them a trial yet. once i do ill post some pics and my findings. the best thing is i still have a firm but comftable ride and i can get over speed humps easy as.

just another option!

Thats ok :O I know you were just giving your opinion, I just wanted to clear up that I am not some dodgy gut trying to flog off crap parts

The car will be on the track most months..my brother and myself have been in motorsport for a while so adjusting isnt a problem

I would never reccomend lowered springs over standard shocks...it gives a comparibly nasty ride and wears the shocks quickly the valving and the springs need to match

hi todd

ive been riding on my pedders springs now for over a week and im pretty happy with them. even thoe i havent got matched shockies its still a firm but comfy ride and it has lowered it just enough to make it look hot. just needs bigger wheels.

when i come down on the weekend ill take you for a spin so you can see for yourself.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
×
×
  • Create New...