Jump to content
SAU Community

Recommended Posts

Well guys guess what!? i need to borrow off somebody's 260rs original brake pads that have a specific part numbers on it. The part #s will be listed below.

As you all know i sent my car for compliance on Saturday, i chatted with the mech and he told me that the brake pads have to be an original ones. Thus the specific part numbers on the damn pads. I said ok and i checked with Yarra Valley Nissan and gues what for the set of 2s it will set me back 2.1ls :thumbsup: . Ohh shit!!! im nor going to pay freaking 2ks for 2 pairs of brake pads!! So if somebody got the pads can i borrow it? Just the get the car thorugh the compliance inspectors. It doesnt have to be new. Let me know. Thanks guys

Pads Part #s : 41060 aa393

44060 ab085

Link to comment
https://www.sau.com.au/forums/topic/125587-260rs-owneres-i-need-your-help/
Share on other sites

Well guys guess what!? i need to borrow off somebody's 260rs original brake pads that have a specific part numbers on it. The part #s will be listed below.

As you all know i sent my car for compliance on Saturday, i chatted with the mech and he told me that the brake pads have to be an original ones. Thus the specific part numbers on the damn pads. I said ok and i checked with Yarra Valley Nissan and gues what for the set of 2s it will set me back 2.1ls :D . Ohh shit!!! im nor going to pay freaking 2ks for 2 pairs of brake pads!! So if somebody got the pads can i borrow it? Just the get the car thorugh the compliance inspectors. It doesnt have to be new. Let me know. Thanks guys

Pads Part #s : 41060 aa393

44060 ab085

i got brand new brembo pads but i aint selling em unless u offer a significant amount for me to buy some better ones ;)

2k is abit pricey haha, ill sell mine for 1.5K still in original wrapping ;)

i got brand new brembo pads but i aint selling em unless u offer a significant amount for me to buy some better ones :D

2k is abit pricey haha, ill sell mine for 1.5K still in original wrapping ;)

I will keep that in mind. Im still waiting for confirmation from the compliance guys as wheter the brake pads are the priginals or not.

BTW Cruise do you still have your stock suspension? If you do any chance of loaning it to me for a fee? Let me know. Thanks Buddy.

Regards,

Yudy

I will keep that in mind. Im still waiting for confirmation from the compliance guys as wheter the brake pads are the priginals or not.

BTW Cruise do you still have your stock suspension? If you do any chance of loaning it to me for a fee? Let me know. Thanks Buddy.

Regards,

Yudy

hey yudy no sorry i dont have any suspension as i sold it awhile ago and it wasnt stock stuff anyways.

plus mine isnt a 260rs remember so it was only rs four gear :D

surely that brake pads price of 2k is a mistake??? cant u get a set off yahoo auctions japan? i only paid $1800 for 2 r34 gtr front calipers (brand new unused) and brand new brembo pads from yahoo auctions about 12 months ago so that means i got a free set of calipers in the deal plus $200 off the pads ;) (thats only front pads and calipers, not the rears)

worth a try, unless you need them within 2 weeks or so as all japan stuff takes around a month to arrive usually.

checkout slidewize imports sponsored section and ask him if he can sort some out for ya ;)

hope it helps

Brad

Edited by CruiseLiner
can you use these Nismo ones???

http://www.japanparts.com/db/partslist.php...e=3&small=2

Looks alot cheaper then 2k

Well cruise oops o forgot about your car too much work load. Anyways like i said before it as to be a specifice part number on the pads. As far as i know theres a nissan part # on the box and theres brembo part # on the pad itself. Cos Nissan is selling brembo pads using a nissan box :D

So i will beed cinfirmation from the compliance today will let you guys know. Also i suspect that the spring in my car is not std. Cos its in red color. That why im also asking for a loaner for the suspension. I will try yahoo though. Thanks But i prefer to loan from someone its cheaper for i dont want o blow the budget (very tight). Let me know. Thanks again guys

ok guys problem solved!!! PHEW!! Lets just say this you sctratch my back i scratch yours kinda of deal with the compliance.

Im planning to use Racebrakes if i need anymore pads. U think by far the are one off the best value pads to get. If i remember correctly a set of front and rears i can get it for under A$500, see what you guys think.

BTW i found out during compliance your car actually needs to be at least 10cm from the ground (lowest point of the bumper bar to the ground). If you are less than 10 cm than you are required to change back to a srock suspension. If the compliance place is telling me the truth. Will see.

Thanks again people

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
×
×
  • Create New...