Jump to content
SAU Community

Skyline Rb20/25 Turbo Kit ... Garrett 3071r With Everything You Need. I.e Gate,intake Pipe,heat Sheilds,lines Etc. $2400


Recommended Posts

Hey there guys.

I have :

GARRETT GT 3071R turbo. .. it is : same spec as the HKS GT2835 which is good for 250rwkw on 1.0bar on a Rb25DET.

THIS IS LOW MOUNT, LIKE STANDARD!!!

Comes with :

Standard extractors with spacer plate for turbo to clear.

Turbo ( 3071R , .64 exh housing, .70 compressor housing )

Sard external wastegate with screamer pipe ( 38mm ).

New Gaskets and adaptors.

Dump pipe and front pipe in one ( Stainless steel with flanges to suit )

Braided SPEEDFLOW oil and water lines .

Intake Pipe with TENZO air filter.

Heatsheild for extractors

Heatsheild for chasis

new angled intercooler pipe to suit stock piping style intercooler kit.

All has only done 300klms as the turbo was abit too small for our goals ( we wanted 300rwkw on 14psi but couldnt get it ) so now we are going T04Z.

This turbo will come with all papers etc, i paid $2200 it over a year ago. and the lines cost me a shitload, gate etc etc.. RRP 3500 for this kit.

I only want $2400 for the entire kit.. this is bloody cheap.

this will fit r32 and r33 skylines ( i.e rb20 and rb25's)

GUYS THIS IS THE FULL KIT... I.E EVERYTHING YOU NEEED!!!!!!!!!!!!!!!!!!!!!

please pm me

thanks allot.

Edited by Monsta-R32

how about 2 grand? are you desperate enough?

if your interested pm me. will have the cash as soon as tax return comes through. approx 3 weeks.

I'd love it.....damn good buy at that price!!.....problem is I aint got any spare cash right now....typical.

good luck with the sale, someone should snap this up quickly

how about 2 grand? are you desperate enough?

if your interested pm me. will have the cash as soon as tax return comes through. approx 3 weeks.

Hey mate,

I am interested , but not sure about 2grand *yet*. please PM me now so we can discuss this.. you might get lucky if you know what i mean. :D

Guest
This topic is now closed to further replies.


  • Latest Posts

    • Have you flushed the initial fluid yet? It should look like a rainbow unicorn shat glitter into it. 2nd or 3rd fluid change is when you party.
    • all brand new unit from Tomei, fluid, bearings, etc. Tomei said they call it a 1.5 lsd because its 100 percent lock up under acceleration and 50 percent under deacceleration.  as I mentioned I used their fluid, install and their break-in procedure, (alot of figure 8's) but even when driving straight, or even slowly backing out of garage for first time, (at 2 mph) then driving to and from figure 8 parking lot, each tire in the rear would sporadically grab, skip, bounce, shutter and skip, shutter back a force I could feel causing clutch to slip then grab, at any speed. shaking entire car. I removed unit, since I put stock back in and all is fine, via process of elimination, its something with the lsd unit itself. I wasn't going to beat up the entire car more or change anything else for no reason as I had a feeling something in the lsd itself was wrong as everything was fine before this alone was installed and I rechecked over everything else after first time backing out I suspected an issue. I'll probably sadly already need new tires now just from trying to drive it 5 miles and performing the figure 8 break in. but if someone has any ideas I'm all ears 
    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
×
×
  • Create New...