Jump to content
SAU Community

Recommended Posts

Have a look in 'group buys' - there was a deal in there for Catco cats recently. Send him a pm and you may still be able to get one for the GB price (around the high 300 dollar mark If I remember correctly)

From what I hear they are very good... Will most likely purchase one myself :laugh:

I swear I told you this in some other thread?? Anyway...stock GTR cats are very good and are 2.5 inch...the really good news is they bolt up and cost under $100

Yes where do i get one

I would look up the yellow pages and find compliance places...Like maybe try SVI they could point you in the right direction probably

Thats to much work, i started uni again and am working i dont have time to go chasing around for second hand parts

ok, so you said your too busy to go looking for parts, but you are asking where you can get one, dude they gave you advice on what to do, take Buntas advice on the GTR cat, it will take u just as much time to make a few phone calls and pick one up as it probally will to get one any other way,

or ask your genie if he knows where you can get one and he might do the running around for u,

I know thats why im asking if anyone know where i can get a good price on any 2.5 inch high flow cat.

Dont be so lazy! Even if someone tells you exactly where to go you should still ring around a bit and make sure that you are infact getting a good price! Research prevents you getting ripped off

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...