Jump to content
SAU Community

Recommended Posts

hey guys... it sounds like i have a hole in my manifold... i dont think its the exhaust... as it sounds directly from the turbo surroundings.. and not from the exhaust below..

whats the best thing i should do..

take it to a exhaust specialist and fix it (im getting quoted a shitload because its hard to reach)

or

is there any sort of aftermarket manifold i can buy which wil be an upgrade or something like that..

if so what should i look for i have a stock turbo catback exhaust power fc and front mount.. hope them mods help what i should look for...

thanks guys

Link to comment
https://www.sau.com.au/forums/topic/130263-r33-manufold-question/
Share on other sites

Try a quick leak test first to see exactly where it comes from so u know exacly what needs to be fixed.......let the car cool down to stone cold then pour some soapy water over the suspected leak area then start the car and see there the bubbling (air leak) comes from

the thing is theres all that stock heat shield around the manifold and my intercooler pipes etc etc around where the actual noise is coming from...

its more than likely the manifold as the noise directly comes from there.. or even the dump pipe.. but it will b way above near the turbo...

if it was the manifold am i better off fixing it or maybe buying an aftermarket one. if so how much would an afetrmarket manifold cost

I doubt VERY much that your stock CAST IRON manifold has a hole in it.

I bet my least used testicle that the leak is from one of 3 gaskets.

The gasket between the manifold and block

The gasket between manifold and turbo

The gasket between turbo and dump pipe

Costs for gaskets are

$50 (this one is a guess)

$20

$20

Cost to actually change them are dependant on how much your mechanic charges per hour.

Expect about 2 hours.

Edited by GTST

2 mechanics checked it out today.....

unique mufflers in belmore/cantebury said i have a turbo/manifold gasket leak... $550 fitted

safs performance of fivedock said the same sorta thing and im looking at $350 at safs performance.. both said will take longer then a day.. considering they gotta pull alotta shit outta the way to reach it...

still lookin around for a cheaper but rather good mechanic who wont take longer than a couple of days as i do work.. and i do need a car ..

anyone know anyone??

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...