Jump to content
SAU Community

Recommended Posts

Tommy Kaira R33 Skyline

The body, engine and interior is in perfect condition.

This car is the only one of its kind. Rare Tommy Kaira kit (moddified), Custom gold ROH Drift R wheels

This car is very nice to drive considering the power, turbo hits full boost at 4 grand, but it isnt, that laggy before that. The car was tuned @ 480hp at the fly wheel at 19 psi by boostworx.

The car has a high mount turbo set up, but has been through 2 defect stations and passed with ease. Tens of thousands spent on this car.

The engine is in the process of a full engine rebuild with forged pistons, all new bearings, new gaskets etc

So if some one buys it will have a brandnew engine with no kms, which could run 300kw all day every day

Engine:

Machined

balanced

CP forged pistons

Total Seal rings

ACL Comp. Beaarings

gates timing belt

HKS 1.2mm metal head gasket

Trust TDO6 turbo

custom high mount manifold

External wastegate

screamer pipe

Port and polish

Z32 AFM

HKS pod

cold air induction

APEXI FMIC

650cc injectors

Bosch fuel pump

SARD fuel pressure regulator

APEXI power FC

HKS boost controller

3 1/2 stainless steel exhaust

Greddy BOV

NISMO spark plugs

Splitfire coilpacks

Tommy Kaira body kit

Tommy Kaira front & rear badges

custom 18" gold drift R rims (8" front/9" rear)

Nexen 235/245 tyres

polished headlights

Front & rear coilovers

cusco strut brace

1.5 LSD

short shifter

brass button clutch

Momo race steering wheel

Tommy Kaira gear knob

APEXI boost guage

APEXI power fc hand controller

APEXI shoulder pads

genuine nissan floor mats

JVC MP3 player

Pioneer front speekers & tweeters

JVC rears

Alpine 2 channel amp

Response 4 channel amp

Alpine 12" type S sub

Looking for $24 000

10 of thousands of dollars spent no expences spared

Any interest or questions please call 0412 978 740

post-26288-1156341476.jpg

post-26288-1156341505.jpg

post-26288-1156341536.jpg

post-26288-1156341571.jpg

Edited by kairazy
Link to comment
https://www.sau.com.au/forums/topic/131510-tommy-kaira-33-300kw/
Share on other sites

Are you sure it is a real Tommy??Can you post up the pic with the Tommy plate in the engine bay please???Where about are you?

This ones not genuine, it is a genuine kit, coz i got it off my last car which was a genuine one, so its just Tommy Kaira kit, badges and gear knob

Edited by kairazy

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...