Jump to content
SAU Community

Recommended Posts

Buy a pump if you can. Makes your life 1000% easier.

If you can't your hands on a pump, I think the only other way would be to try and feed a hose down through the gearstick hole somehow....

Not sure how but !!!!

I got my pump at SuperCheap for $15 :D

J

Going through the shifter hole aint a bad idea but there is 1 tricky brass circlip you must defeat first.

To remove the gearshift,

undo the 2 screws behind the ashtray...

unscrew the gear knob off...

lift out the centre surround (its clipped in, give it a little tug upwards from the end pointing towards the handbrake)...

remove the next rubber cover (4 screws)...

turn the next rubber boot upwards and inside-out to get it out the way...

now you can see the top of the shifter and 2 circlips inside...

the silver looking one can stay there...

the brassy looking one needs to come out (unfortunately it doesnt have any eyelets to use a proper circlip tool on it) :D

if you get this clip out, the whole lot just lifts straight out...

make sure you left it in neutral to make it easy going back in...

now you can use a funnel or even a squeezy water bottle to add the CORRECT amount of oil.

dont spill gear oil inside the car whatever you do!

put it all back together the same way

Now the real fun part... getting that circlip back on!

get an extra pair of hands to help work this puppy back in!

hope i havent forgotten anything

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...