Jump to content
SAU Community

Recommended Posts

Hey people.

I am in need of cefiro front passenger power window gear ( rail it slides on, window clip, motor etc ) but its kinda hard to find it. my question is do you know if r32 4door gear will swap over, as i have access to a door but dont want to strip it to find it wont match up. also, whats a good substitute sunvisors? as when mine arrived with a cage it was lacking them.

cheers for ya help

PS: if anyone has any of these parts please PM me. i am in perth.

Link to comment
https://www.sau.com.au/forums/topic/139825-ceffie-question/
Share on other sites

kaliber man wassup i been thru all this before, TRUST me on this one, new parts aren't *that* expensive, they come with a 1 year warranty, and they are brand new parts not some shonker out of an old wreck.

check out DVG in morley in the spare parts dept. they source the parts from nissan japan brand new, i had to get window amps window regulators all sorts of gear n it only worked out to be about 2-300 ish,

i tried R32 parts they surprisingly do not fit at all. think of it this way, the power window gear in your car is stuffed becuase of it's age, and prolonged use, so how is an old wreck's lifespan going to be any different? windows are something that is wound up n down many times a day so don't be afraid to spend money on parts that last,

hope that helps buddy it will cost more for now but you won't have to worry about it again for a very long time!

Link to comment
https://www.sau.com.au/forums/topic/139825-ceffie-question/#findComment-2605396
Share on other sites

  • 3 weeks later...

hey dude if you still having trouble, go to your local nissan parts dealer, i had to get a new regulator for my ceffy, the left rear, it was $180, brand new from japan and came with everything except the motor and was the easiest thing ever to fit, the motor was never made in oz so the cost $600!!!!! from japan.

Link to comment
https://www.sau.com.au/forums/topic/139825-ceffie-question/#findComment-2660030
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
×
×
  • Create New...