Jump to content
SAU Community

Recommended Posts

17"x7.5" & 8.5" g7 panasport rims (unsure of offset, sit flush with guards on my 32) very good condition and would look mint with a good clean and polish, have no gutter marks at all! (have 2 spare tires with these rims) can do these without tires or whatever to suit buyers needs!

imgp0972yj7.th.jpg

$550

16"x7" & 8" Sparco racing rims (+35 & +38 offset) one rim has small dent on the inside but i have driven on them for the past year and had no problems at all. Atleast 90% tires on front and 80% on rears.

dsc00373ei7.th.jpg

$550 (SOLD!!!)

Brand new front Adjustable Whiteline sway bar. (R32)

$215 (SOLD!!!!)

Unifilter pod with oil to suit

imgp0400wh0.th.jpg

$20

Turbo timer

imgp0398jd0.th.jpg

$25 (SOLD!!!)

Boost controller

imgp0742dh2.th.jpg

$10 (SOLD!!!)

Stock R32 intercooler and some piping

imgp0401al1.th.jpg

$20

Stock rb20 injectors in good condition

$15 each or $80 for all six

Dual stage solenoid boost controller

Make an offer!

Located in adelaide

pm me or phone/sms me on either 0401219230

Edited by mr_rbman
Does the turbo timer do seconds? Is it fully working?

It does fully work but its been out my car for about a year so remembering all the functions is a little hard, i do remember thought it did everything my mates apexi one did, i do know you can adjust the time you allow for it to cool down just not sure if it was down to the last second!

  • 5 weeks later...

also found today my old boost controller that came with the car, its a no name brand but used like a solenoid device to switch from lo-hi boost (held 10 & 13psi beautifully when on my car. Comes with an in cabin switch too!) Don't need any more as i have a 15 psi actuator!

Make an offer!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • How many of you guys run the synchro os giken set and at what power? Do you then also use the billet plate?  How is it launching with it, any dragy times from 0-60? 60ft?
    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
×
×
  • Create New...