Jump to content
SAU Community

Recommended Posts

Flying Performance International is the only official online Hybrid & SABER dealer

Flying Performance International official website www.flyn.com.au

Check out the Hybrid & SABER official website at www.powerdigger.com

LOGO10.JPGflying%20banner2.JPG

logo%20top%207.JPG

sabergauges.JPGsabergauges%20on%20off.JPG

SABER 60mm ELECTRONIC GAUGES

SMOKEY LENS SERIES now for sale! On SPECIAL ONLY $150 each gauge

SABER 60mm gauges are electronic blacked out gauges which have high responsiveness and refined designs. When the car is off they have a black face with no numbers on them. As soon as the car is turned on, the gauges light up in bright white with full effect.

Boost%20blacka.JPGOil%20press%20blacka.JPG

Oil%20temp%20blacka.JPGWater%20tamp%20blacka.JPG

AF%20blacka.JPG

* SABER electronic gauges provide more accurate reading over the mechanical type gauges, giving you a peace of mind over the reliability of your rides.

SABER full-line up: boost pressure in PSI (for turbocharged and supercharged engines), oil temperature, oil pressure, water temperature, and air / fuel ratio, all with SABER black face and white dials.

* SABER gauge dials are invisible when the ignition switch is off. Once the ignition switch is turned on, a clear display appears with white LED illumination. A red emitting instrument needle pointer are used in the gauges to increase visibility at night and in low-light conditions. They also features built-in light dimmer function.

* SABER gauge pointers are driven by stepping motor with a microprocessor, needle accuracy up to 0.1 degrees of movement. It provides a smooth instantaneous response for rapid acceleration of high performance vehicles.

* The included removable gauge visor is for eliminating the virtual image of gauges reflected on the windscreen.

* All SABER gauges are applicable only for 12V vehicles.

* Each Kit also comes with gauge mounting kit, gauge visor, all wiring and a step-by-step instructions.

Payment Instruction

Postage & Handling = $15 freight Australia wide

PAYMENT TO : FLYING PERFORMANCE INTERNATIONAL PTY LTD

ST. GEORGE BANK LIMITED

BRANCH NO. : 112-879

ACCOUNT NO. : 065766824

PLEASE you must give the bank your forum user name as the description of the transaction. That way it shows up on our bank statement with the amount you have sent us. So we can match your order with your payment otherwise there may be a delay for us to match the payment to your order!

After you have made the payment, please you must e-mail us with your payment date & amount, your name & postal details.

Once we receive your payment, we will inform you and send it at the same time.

It will be packed and sent securely in boxes or bubble padded bags for best protection.

Optional extra

7f_1.JPG $48 SABER stainless steel mesh air filter

41_1.JPG $180 SABER 60mm electonic smokey lens gauges

59_1.JPG $259 SABER GDB WRX /STi air intake kit

cf_1_b.JPG $49 HYBRID a set of 10 HOSE CLAMPS, 2.5", 2.75" & 3"

f0_1_b.JPG $19 HYBRID SILICONE HOSE REDUCER, We have 3" - 2.75" / 3" - 2.5" / 2.75" - 2.5", you tell us the size you want.

0a_1_b.JPG $17 HYBRID SILICONE HOSE, 3" / 2.75" / 2.5" / 2.25" / 2" / 1.5" STRAIGHT HOSES

53_1.JPG $7 FLYING SILICONE VACUUM HOSE

93_1_b.JPG92_1.JPG

12_1.JPG67_1_b.JPG $49 Flying bov

05_1_b.JPG $49 Flying boost controller

7b_1_b.JPG $29 Flying boost controller

5c_1_b.JPG $199 + $25 extra freight

0a_1.JPG $189 Flying Rb20det / rb25det turbo manifold

dd_1.JPG $149 Flying 180sx s13 r32 300zx camber arm

e3_1.JPG $149 Flying s14 s15 r33 r34 camber arm

fe_1.JPG $99 FLYING SKYLINE R32 R33 R34 RB20 RB25DET TURBO DUMP PIPE

7b_1.JPG $25 FLYING OIL CATCH CAN

HDS15HR.jpg

HSD Suspension

HSD coil-overs are used by 2005 Drift Australia champion Darren Appleton and many other prominent drivers in Australia. Now available only in the premium HR series, HSD coil-overs feature 55mm heavy-duty full-tapped dampers with 15-step damping adjustment. All models feature pillow-ball top mounts for easy installation and maximum control. Models with strut-type suspension also feature camber adjustment, while all models feature adjustable base height and spring seat height.

HSD coil-overs are supplied with spring rates intended for club-level motorsport, drift and street driving. Harder or softer springs are also available at just $100 a pair. All rates from 3kg/mm to 14kg/mm are kept in stock.

All HSD coil-overs come with a 12-month warranty against manufacturing defects.

NISSAN

S13 Silvia or 180SX $1549

S14 200SX $1549

S15 200SX or Silvia $1549

R32 Skyline GTS & GTS-t (GTS-4 available to order) $1549

R33 Skyline GTS25 and GTS25t $1549

R34 Skyline GT and GT-t $1549

R32 GT-R $1549

R33 GT-R $1549

R34 GT-R $1549

Z32 300ZX and Fairlady Z $1549

Z33 350Z $1549

TOYOTA

JZX90 Mark II, Cresta, Chaser $1549

JZX100 Mark II, Cresta, Chaser $1549

JZA70 Supra (Also GA-70, MA70, MA71) $1549

JZA80 Supra $1549

SXE10 Altezza and Lexus IS200 **NEW** $1549

SUBARU

GC8 Impreza WRX (MY94 to MY00) $1599

GDB Impreza WRX (MY01 to MY02) $1599

GDB Impreza WRX (MY04 on) $1599

SG5 Forester $1599

MAZDA

FC3S RX-7 (Series IV and V) $1549

FD3S RX-7 (Series VI to VIII) $1549

MITSUBISHI

CP9A Lancer Evolution (IV to VI) $1549

CT9A Lancer Evolution (VII on) $1549

HONDA

EG Civic $1549

EK Civic $1549

DC2 Integra $1549

DC5 Integra **NEW** $1599

AP1 S2000 $1549

saber electronic boost gauge, will it fit into R32gtst (12v battery ?)

does it need a control unit or is it direct fit ?

saber electronic boost gauge, will it fit into R32gtst (12v battery ?)

does it need a control unit or is it direct fit ?

yes, it will certainly fit your car, and you dont need any controller box, they fit direct and come with senders.

Latest SABER Stainless Steel Mesh Air Filter $49 each

Engine power is directly related to the airflow both coming in (Intake) and passing out (Exhaust) of the engine, factory intake systems are highly restrictive, so limiting engine power and torque. Saber Air Filter produces smoother and more even airflow with increased velocity for optimal air / fuel mixture. Installing our Saber Air Filter is one of the easiest and most inexpensive ways to increase engine response and better fuel efficiency.

* For both Turbo and NA cars

* Strong structure with 304 stainless steel mesh filter used

* 3" inlet with stainless steel racing clamp included

* Proven power gain for maximum performance

* It produces much louder intake sound and instant power gain

* Easy to maintain, fully washable & re-usable

* 2 sizes available : 16cm base width x 11.5cm height

12cm base width x 13.5cm height

* SABER electronic gauges provide more accurate reading over the mechanical type gauges, giving you a peace of mind over the reliability of your rides.

SABER full-line up: boost pressure in PSI (for turbocharged and supercharged engines), oil temperature, oil pressure, water temperature, and air / fuel ratio, all with SABER black face and white dials.



  • Latest Posts

    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
×
×
  • Create New...