Jump to content
SAU Community

Recommended Posts

Hi, I'm selling my R32 soon so I'm selling off various unused parts. I'm located on the Sunshine Coast and pickup is much preferred, especially for the wheels.

Item 1: 18" Work VS-KF wheels, shadow chrome, 5x114.3

18" x 7.5" fronts with 225/40 Yokohama Avids +45 offset

18" x 8.5" rears with 225/40 Yokohama Avid, Dunlop LeMans +45 offset

I got these about a year ago from slidewize imports. The 3 yokohama tyres have some life left in them, but the dunlop is worn around one edge (see pics). Overall condition is very good, although one valve cap is missing. I had these on my R32 with 20mm spacers on the front, also fitted on a soarer with no spacers. I think they will also fit on R33, S15 etc.

Price: $1800 or MAKE AN OFFER or part trade for xbox360 or Wii etc

wheels1wb7.th.jpg

wheels2gj6.th.jpg

wheels3zj6.th.jpg

wheels4me4.th.jpg

Yokohama tread typical

tyregoodjb2.th.jpg

Dunlop worn tread on edge

tyrebaddf8.th.jpg

90979513cc7.th.jpg

12005039yq5.th.jpg

Item 2: Nismo Gearknob

Genuine Nismo chrome gearknob with original box and shift sticker. Has some minor corrosion/spots but generally good condition.

Price: $50 SOLD

gearknob2dy6.th.jpg

gearknob3nz0.th.jpg

Item 3: Apexi Power Intake for R32

Only used for about 1000km. Original Box and everything

Price: $70 SOLD

filterpy5.th.jpg

Item 4: Front Strut Brace for R32

Was told it was a cusco when I bought it, but who knows, there's no brand on it. Pretty poor cosmetic condition. See pics

Price: $50 SOLD

brace1sc6.th.jpg

brace2sk5.th.jpg

brace3du7.th.jpg

Item 5: T-Peice boost controller

As seen in this thread. Unused.

Price: $15 SOLD

tpieceoc2.th.jpg

Item 6: 20mm bolt on spacers x2, hub-centric

5x114.3 20mm spacers with nuts. Custom machined for R32 gts-t. Used with the above wheels.

Price: $50 with the wheels if you need them. Will only sell with wheels at this stage

spacerdd4.th.jpg

Item 7: Short Shift Kit

To suit R32. Generic brand, copy of a C's I think. Missing one crush washer.

Price $50 SOLD

shortshiftuw3.th.jpg

Edited by civi_joe
Will strut and short shifter fit R32GTR? Very keen if they will.

The short shifter won't fit, and I think I read somewhere that the brace will, but not 100% sure.

The short shifter will fit R32 gts-t, A31 cefiro, and C33 laurel

mate ill take the short shifter is ya willing to send to adeliade......pm sent

hey mate, if u still have the strut brace ill take it for $50. if its cool by you i am going up the coast on sat/sunday

cheers glenn

  • 3 weeks later...
  • 2 weeks later...
  • 2 weeks later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Please use a modern ECU. PowerFC with the Nintendo Gameboy controller is horrible. It's not 2005 anymore.
    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
×
×
  • Create New...