Jump to content
SAU Community

Recommended Posts

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

i think there should be a good turn up.. i no there some nice gtr coming from bathurst including a r34 gtr and i think a purple 33 gtr.

plus sean from these forums is taking his 32gtr with me in at. plus there is a few more 33gtst from bathurst and who ever else is on the list in the first page

I'll come along!

what time is the meet at richmond airbase?

well where leaving bathurst at 730 so prob 1.5 to 2hrs it will take to get there.

so if ya there at say 9 we wouldnt be far away...hope to see ya there dan

well where leaving bathurst at 730 so prob 1.5 to 2hrs it will take to get there.

so if ya there at say 9 we wouldnt be far away...hope to see ya there dan

no worries see then!

I'll try and bring a few cars along!!!

I'd love to go! how many people are deffinantly going? i need a boost controller but!!! can anyone organise a decent electronic boost controller for me?

At the moment we got 15 definates that i know, BUT it is a cruise so anythin could happen..... like the cruise to Bathurst last year that 3 of us went to lithgow to meet, but no one showed...... the went elsewhere and went from around 30 on the attendance list but only 4 or 5 went from what i heard...

No changes will be made on this cruise to wisemans.

also got a mixture of skylines including 32,33,34 GTR,GTST and to tell you the truth you gotta see the 33 GTR with a do-luck kit... personal it's sweet...

sorry guys, not gona be able to make it.... :huh:

I forgot that my fiance and I have an appointment to look at a wedding reception for our wedding later this year... lol

will organise something for the following week!!!!! :)

sorry guys, not gona be able to make it.... :huh:

I forgot that my fiance and I have an appointment to look at a wedding reception for our wedding later this year... lol

will organise something for the following week!!!!! :)

what a shame would have been a good one i think..oh well next time

come on peoples its tommorrow get together some mates and come along.....

I dont think I can get away in the morning so at this stage rule me out.

:laugh:

I you guys are calling in a maccas for a while at Lithgow on the way back, gimmie a call, a short cruise is better than none I spose...




  • Similar Content

  • Latest Posts

    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
×
×
  • Create New...