Jump to content
SAU Community

Recommended Posts

hey all im sellin my chromies, there off my supra (its got the small brakes)

they wouldnt fit a big brake setup

anyways im not allowed to leave them piled up in the garage... there takin up to much space, so they have to go

so here they are:

front 225/40zr18 firenza, both of the front wheels have 90% tread on them, and the front right wheel is brand new

i also have another front tyre with 85% tread left on it

and i have another rim and tyre with 85% tread left on it for the front

rear 235/40zr18 firenza, both wheels have about 40% tread left on them

the rims are imitation AME style

only a (rear) rim has slight damage from the previous owner

all centre caps provided aswell as two different lock nuts and tools

asking price is $800 for everything

i live in castle hill, sydney

pm me if ur interested or have any questions

post-33716-1165750175.jpg

post-33716-1165750223.jpg

post-33716-1165750255.jpg

post-33716-1165750291.jpg

post-33716-1165750344.jpg

Edited by lukesz
Link to comment
https://www.sau.com.au/forums/topic/146759-fs-5x-18-chrome-wheels-1-extra-tyre/
Share on other sites

  • 1 month later...

still trying to sell these wheels..... :D

bump down to $800

these will fit skylines, supras, soarers, beemas, benzs, fords etc

Edited by lukesz
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...