Jump to content
SAU Community

Air Con Not Working/not Turning On

dano4127

By dano4127,
in General Maintenance

 Share

Recommended Posts

dano4127 Veteran

dano4127

Posted
Posted

My air con is not working at all as if there is no power going to it.

BTW this is in a 33 GTST

I have checked the fuse under the dash and its good, There is a big blue fuse (I think its a fuse) in the box in the engine bay. Can anyone confirm what it is exactly and how do you get them out because i have given it a good pull but no luck. once it is out how do i know if its f**ked?

also where to get a new one?

I do not want to ring supercheap and ask for "one of the blue thingys unda the bonnet"!

Cheers,

Dan

Link to comment
https://www.sau.com.au/forums/topic/146871-air-con-not-workingnot-turning-on/
Share on other sites
dano4127 Veteran

dano4127

Posted
  • Author
Posted

it has been working fine and verry cold

The unit has no power as in no lights you press all the buttons and nothing happens nothing on screen as is it was completely turned off

dano4127 Veteran

dano4127

Posted
  • Author
Posted

ok so that fuse "thingy" i was talking about earlier is actualy the relay!

so no to find out if it works, should it make a distinct click sound once the aircon is turned on?

Godzilla32 Veteran

Godzilla32

Posted
Posted

Yeah it should click to engage whatever its powering. Compressor clutch? Id be more inclined to check fuses for your climate controls though. Do any of the other functions work? IE: Normal blower...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • bilbo117
      R34 GTR Seats / No longer reclining

      By bilbo117 · Posted

      Hi all, Long time since I've posted here. Looking for some advice on what I can remove to further identify the cause of my issues.  I can move the passenger seat forward and back but the knob used to adjust the seat angle is pretty much free spinning, there's very little resistance.  Removing the side cover I can see that the chain is intact but the shaft for the adjustment spins without the gear attached to it moving.  What's my next step for disassembly here? Is this a common fault? Just being a little cautious as I didn't want to start removing bolts for a spring to fly out or something equally as stupid.  Cheers
    • Dose Pipe Sutututu
      Ethanol Content Sensor - Always at 11%?

      By Dose Pipe Sutututu · Posted

      Those above shitboxes, mediocre and above usually have a turbo strapped to them, hence the slightly higher octane is required.  
    • sinn3r
      R34 Skyline climate control unit transistor

      By sinn3r · Posted

      Hi all,   long time listener, first time caller   i was wondering if anyone can help me identify a transistor on the climate control unit board that decided to fry itself   I've circled it in the attached photo   any help would be appreciated
    • Kinkstaah
      Blue slip

      By Kinkstaah · Posted

      I mean, I got two VASS engineers to refuse to cert my own coilovers stating those very laws. Appendix B makes it pretty clear what it considers 'Variable Suspension' to be. In my lived experience they can't certify something that isn't actually in the list as something that requires certification. In the VASS engineering checklist they have to complete (LS3/NCOP11) and sign on there is nothing there. All the references inside NCOP11 state that if it's variable by the driver that height needs to maintain 100mm while the car is in motion. It states the car is lowered lowering blocks and other types of things are acceptable. Dialling out a shock is about as 'user adjustable' as changing any other suspension component lol. I wanted to have it signed off to dissuade HWP and RWC testers to state the suspension is legal to avoid having this discussion with them. The real problem is that Police and RWC/Pink/Blue slip people will say it needs engineering, and the engineers will state it doesn't need engineering. It is hugely irritating when aforementioned people get all "i know the rules mate feck off" when they don't, and the actual engineers are pleasant as all hell and do know the rules. Cars failing RWC for things that aren't listed in the RWC requirements is another thing here entirely!
    • GTSBoy
      Best place to order Authetic R32 Parts in Japan

      By GTSBoy · Posted

      I don't. I mean, mine's not a GTR, but it is a 32 with a lot of GTR stuff on it. But regardless, I typically buy from local suppliers. Getting stuff from Japan is seldom worth the pain. Buying from RHDJapan usually ends up in the final total of your basket being about double what you thought it would be, after all the bullshit fees and such are added on.
×
×
  • Create New...