Jump to content
SAU Community

Qld Vg30 Turbo, Rb25 Head Complete, Rb20 Turbo, Rb26 Bottom End

James_03
 Share

Recommended Posts

James_03 Mentor

James_03

Posted
Posted (edited)

As per title guys have the following I want to get rid off as its not required. I know I had the rb26 block for sale previously but I was f**ked around by someone in sydney something fierce so now its back up, 4wd sump is being used by me but.

VG30 turbo - good condition perfect for 20/25 upgrade - SOLD

RB25 R33 head - low k's 40,000 with VVT, cams, valves, stem seals etc, rocker covers, and possibly the valley cover, cas

too (Will need to be re-faced as it has had a repair to the very corner of the head. VVT has been modded already to suit rb30 block with external feed. - $400

RB20 Silvertop turbo - no shaft play excellent condition - $150

RB26 bottom end complete minus 4wd sump 90,000k's- $550 (dis-assembled)

Looking to sell some this weekend guys so I will listen to any offer you wish to make as all this stuff is no longer required.

Cheers.

Edited by James_03
13thracer Rising Star

13thracer

Posted
Posted

hey mate you in brisbane im interested in the turbo and would you sell the 26 crank and rods seperate if so what condition they in.

thanks scott

James_03 Mentor

James_03

Posted
  • Author
Posted (edited)

Im in Browns Plains/Regence Park, Brisbane southside.

Price drop on the complete bottom end guys $550 come and get it. Now thats pretty damn good as I just need the thing gone.

Also head is now $400.

The RB26 bottom end is fine, removed for a 3ltr conversion. I can get pics of the RB25 head if req, it just needs to be faced like you would prior to fitting any head.

Cheers.

Edited by James_03
Trooper Experienced

Trooper

Posted
Posted
james can you please send me your phone number via pm re: bottom end.

thanks.

How much damage is done on the head and what is required to repair?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      Bit wet, but YUMMY
    • GTSBoy
      Pops when backing off throttle, rough-ish sound through rev range.

      By GTSBoy · Posted

      Keeping in mind that I am currently getting flat 10 L/100km on my RB25DET, which means >>500km/tank. I would test this car for vacuum leaks, check codes and AFM signal with NissDataScan as D says, check plugs, do a compression check while they are out.
    • Duncan
      Pops when backing off throttle, rough-ish sound through rev range.

      By Duncan · Posted

      It is hard to be specific half way across the world...but it *seems* like it might have a minor issue. Is the idle stable and does it rev smoothly? I would not expect any pops out of what I am assuming is a standard ECU, standard tune, standard exhaust. You can use Nissan Data Scan to find out exactly what is happening when it runs, the cable/software is reasonably affordable if you are not planning on changing the ECU (which hopefully you are not with an NA skyline) BTW your mileage may not be that far off, these are heavy old tech cars, and being NA might mean you use a heavy foot to keep up with traffic....
    • AdiR34
      Pops when backing off throttle, rough-ish sound through rev range.

      By AdiR34 · Posted

      Hey guys! Y'all are the masters so figured I'd check in on a few items here. - My engine sounds ever-so-slightly more raspy than the other NA RB25s I've listened to. It's barely noticeable but definitely a slightly different sound. - When I back off the throttle at high RPM, I will sometimes get a pop out of the exhaust, assuming this can be diagnosed as misfire. Some history on the car: - Had an exhaust leak in auction sheet but was claimed to be fixed by seller (bought from USA importer).  - Car's coil packs and sparks were replaced when it was sold to me, but unsure on what the gap is and whether the coil packs are correct.  - A prior mechanic had misdiagnosed a pilot or throwout bearing sound as LSPI/detonation. Had played with timing a bit, pops/raspy sound of engine just got worse. Got timing reset. - Had failed emissions a few times. First time went in as is, failed. Second time, replaced cat, still failed, running rich as hell. Third time replaced o2 sensor, passed. Car still smells gassy though. - Timing belt and valve cover gasket also replaced.  - Gas mileage is... low. about 350-400K per tank.  Any idea if I'm having any serious issues here or does this all sound like normal old NA RB stuff and I'm fine to drive it with the pops/slightly raspy engine? If it'll help, I can get drop a video of the sound of the engine.
    • Duncan
      Looking for a part number for this part here

      By Duncan · Posted

      So....to find any R chassis part number, get your VIN (will be something like ER33-xxxxxx for you) and go to: https://www.amayama.com/en/genuine-catalogs/nissan and enter it. From there you have access to a web version of Nissan's part system, FAST. It is a bit tricky to get used to, so maybe have a shot and post up what you think.  You can also search by general model but note in some cases your car might have different options so VIN is safest.  On diagram 211 I got 14075-75T16 for Connector, Water Hose If I search for part 14053‑21U10 that you posted, that is also a water hose but not the one bolted to the plenum and 14075‑04U00 is the fitting where the water hose goes into the block.
×
×
  • Create New...