Jump to content
SAU Community

Recommended Posts

Hey all,

If you're looking for some fat wheels without having to go 5 stud, then these are for you...

Came off my S15 fronted sil. Rears will fit with some flaring.

Work VS-XX - Finest 3 piece Modular Construction, Super Lightweight wheels with reverse outer rim.

4 hole - 114.3 PCD

18x9.5JJ off +19 - Toyo Proxes4 225/40ZR18 Tyres - 90% tread (slight camber wear on inner edge)

18x10.5JJ off +19 - Trampio Guwn 245/40ZR18 Tyres - 80% tread

These tyres alone are worth big coin...

One wheel has a small section of minor gutter rash, the rest are basically flawless except for some small light, scratching (normal wear basically). Awsome condition!

The fronts have a good 70mm worth of dish and the rears, 90mm!

Come with all 4 Work centrecaps.

All wheels have recently been balanced.

$2,500 FIRM

Located in Adelaide, SA.

Can deliver to your door anywhere Australia wide for $100!!

PM with any questions/queries.

post-15856-1166926642.jpg

Edited by driftKNG

Hey all,

Tyres are sitting around doing nothing so it's time to go...

Here's the rundown:

16s

- 4 x BRIDGESTONE TURANZA ER30 - 205/45R16 - 70% - SOLD

17s

- 2 x BRIDGESTONE POTENZA RE050A - 215/45R17 - 70% - $100

- 2 x BRIDGESTONE POTENZA G3 - 255/40ZR17 - one at wear indicator, one with 2mm+ indicator - $50

18s

- 2 x PIRELLI PZERO ROSSO - 255/40ZR18 - 60% - SOLD

- 2 x BRIDGESTONE POTENZA RE040 - 235/40ZR18 - 70% - SOLD

- 2 x BRIDGESTONE POTENZA RE040 - 235/40ZR18 - 50% - SOLD

- 2 x SILVERSTONE FTZ SPORT EVOL 8 - 235/40ZR18 - 1 BRAND NEW /W NIPPLES, other 95% - $300

Will not be taking pictures. - Come round and check em out if interested. Prices are firm.

Cheers!

Edited by driftKNG
- 2 x BRIDGESTONE POTENZA RE040 - 235/40ZR18 - 70% - $100

- 2 x BRIDGESTONE POTENZA RE040 - 235/40ZR18 - 50% - $50

I'll take these off your hands. Today if you're available. Would like to inspect them first so if I could get your address that would be sweet! I'll PM you too.

cheers mate

How much to ship the 2 pirelli pzero 255/40/18 to sydney?

Also, I am keen on the gram lights, but why only 235's on them?

Great looking wheels and GL with the sale !

I just wanted to know what courier company you use to get :

"Can be delivered to your door ANYWHERE Australia wide for $100!!"

I ve got a set of wheels i need shipped across the country and I'm in need of some advice, if u can help ?

How much to ship the 2 pirelli pzero 255/40/18 to sydney?

Also, I am keen on the gram lights, but why only 235's on them?

PranK - It will cost you $65 to have these sent to your door in Sydney... Unfortunately there is a minimum charge associated with items of this nature. >_<

I put 235's on the Gram Lights because I feel this is the best profile (looks wise) while still maintaining drivability. Anything more stretched on that width starts to get a little dangerous. Suits these wheels perfectly!

:laugh:

Edited by driftKNG

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Also, I logged some data from the ECU for each session (mostly oil pressures and various temps, but also speed, revs etc, can't believe I forgot accelerator position). The Ecutek data loads nicely to datazap, I got good data from sessions 2, 3 and 4: https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-2?log=0&data=7 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-3?log=0&data=6 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-4?log=0&data=6 Each session is cut into 3 files but loaded together, you can change between them in the top left. As the test sessions are mostly about the car, not me, I basically start by checking the oil pressure (good, or at least consistent all day). These have an electrically controlled oil pump which targets 25psi(!) at low load and 50 at high. I'm running a much thicker oil than recommended by nissan (they said 0w20, I'm running 10w40) so its a little higher. The main thing is that it doesn't drop too far, eg in the long left hand fish hook, or under brakes so I know I'm not getting oil surge. Good start. Then Oil and Coolant temp, plus intercooler and intake temps, like this: Keeping in mind ambient was about 5o at session 2, I'd say the oil temp is good. The coolant temp as OK but a big worry for hot days (it was getting to 110 back in Feb when it was 35o) so I need to keep addressing that. The water to air intercooler is working totally backwards where we get 5o air in the intake, squish/warm it in the turbos (unknown temp) then run it through the intercoolers which are say 65o max in this case, then the result is 20o air into the engine......the day was too atypical to draw a conclusion on that I think, in the united states of freedom they do a lot of upsizing the intercooler and heat exchanger cores to get those temps down but they were OK this time. The other interesting (but not concerning) part for me was the turbo speed vs boost graph: I circled an example from the main straight. With the tune boost peaks at around 18psi but it deliberately drops to about 14psi at redline because the turbos are tiny - they choke at high revs and just create more heat than power if you run them hard all the way. But you can also see the turbo speed at the same time; it raises from about 180,000rpm to 210,000rpm which the boost falls....imagine the turbine speed if they held 18psi to redline. The wastegates are electrically controlled so there is a heap of logic about boost target, actual boost, delta etc etc but it all seems to work well
    • hahah when youtube subscribers are faster than my updates here. Yes some vid from the day is up, here:  Note that as with all track day videos it is boring watching after the bloopers at the start.  The off was a genuine surprise to me, I've literally done a thousand laps around the place and I've never had instability there; basically it rolled into oversteer, slipped, gripped and spat me out. On the way off I mowed down one of the instructor's cones and it sat there all day looking at me with accusing cone eyes as I drove past. 1:13:20 was my fastest lap, and it was in the second session, 3rd lap.  It (or me!) got slower throughout the day as it got hotter.      
    • It sounds like you want what the Toyota Landcruisers have for their roof racks. Wanna know what you end up with? Rust holes in the roof, and water everywhere...
    • Discovered today that if I select reverse first and take my foot off the brake, then select drive, the drive indicator light works and so does the tiptronic gear indicator. 
    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Does anyone here have any ideas?   Cheers guys
×
×
  • Create New...