Jump to content
SAU Community

Recommended Posts

Originally bought the piping off Beer Baron here - http://www.skylinesaustralia.com/forums/in...c=143480&hl. Piping is exactly how beer baron describes it.

Looks much, much better than the stock stuff and apparently has some performance benefits as the pipes don't expand like the rubber ones under full boost. Plus the hoses are not as susceptible to blowing off as the stock ones are. The kit comes with the Greddy Alluminium hard pipes, silicone hoses and hose clamps. The hoses are ok, but have seen better days looks wise.

I'm asking 350 plus freight. Selling due to no longer owning an R33 GTR - ** NOTE: IT DOES NOT FIT R32 GTR **

I Also have a standard R33 GTR radiator fan in good condition - much better than R32 one, and will fit all RB water pumps.

Asking $50 pick up or $65 delivered Selling due to no longer owning R33.

Pair of Red Bride Brix seats with rails to suit R32/R33 etc, in perfect condition. Asking $1600 plus freight. Selling to update to a fixed back Bride and a Brix II.

New HKS SR20DET Inlet cam gear - SOLD.

S13 Cusco Adjustable Camber tops - SOLD.

**Please note Black Bride in Picture has already been sold.

S13 Hybrid Intercooler kit, with Turbosmart BOV - Asking $450.

Cheers

post-14525-1167869521.jpg

post-14525-1167869561.jpg

post-14525-1167869588.jpg

post-14525-1179058983_thumb.jpg

post-14525-1179059008_thumb.jpg

Edited by ookami
  • 2 weeks later...
  • 4 weeks later...

would this fit r32 GTR or not??? cause the coolers are very similar!

let know via pm if you can mate, thanks!

STILL FOR SALE???

very interested...

I have Pm'd you,Consider sold if still up for sale!!!

  • 1 month later...

Pms replied too. sorry for the late reply I haven't been on here since i sold my R33, still for sale.

Edited by ookami
Pms replied too. sorry for the late reply I haven't been on here since i sold my R33, still for sale.

if these replaces the stock items on the r33 gtr then consider them sold

how much posted to nsw 2218...if you're close ill come and pick em up.

cheers

jeff

  • 1 month later...
if these replaces the stock items on the r33 gtr then consider them sold

how much posted to nsw 2218...if you're close ill come and pick em up.

cheers

jeff

Sorry for the late reply I haven;t been on here for quite some time, yes they do replace standard rubber R33 piping with alloy solid piping. Could do it for $365 delivered.

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
    • So M12 and sealant should be fine?    NPT ” because that’s what I had and what I could get atm. 
×
×
  • Create New...