Jump to content
SAU Community

Replacing Speedo Cable In 32 Gtst

RB20JT
 Share

Recommended Posts

RB20JT Rising Star

RB20JT

Posted
Posted

Guys i bought a new speedo cable. Coz that stupid plastic piece has broken. So how do u replace it? anyone got like instructions step by step on how to do it? i got the speedo cluster out....so thats where im up to..

i seriously got no clue on where to go to now...so instructions anyone?

CHEERS BOYS!!

Link to comment
https://www.sau.com.au/forums/topic/149896-replacing-speedo-cable-in-32-gtst/
Share on other sites
RB20JT Rising Star

RB20JT

Posted
  • Author
Posted

guys i didnt realise how straight forward it was to install a speedo cable. Only thing is that there are a few cables underneath that get in the way of the firewall cover and makes it difficlt to get the cable around.

thanks boys

RB20JT Rising Star

RB20JT

Posted
  • Author
Posted

yeah just be patient when uyr under the car and feeding the cable and plate through the pipes that ar allready under the car and GET IN THE WAY!! have two people aswell heaps easier, other snappiung the cable will be much more likely.

simple as:

*undoing the cable from the back of the gear box

*unscrewing 3 screws on the plate that is mounted righthand side of the engine bay bout half way up the firewall.

* make sure its been disconnected from the speedo

*and fgeed it from top down through the plastic tube out the firewall

*(just reverse the proces when putting it back in)

TIP when putting the cable back in, get sum1 to feed down from the top of the engine to you when ur under the car, at the same time, guide it through the stupid pipes that get in the way!! BE PATIENT AND HAVE FUN!!! HAHAHAHA

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...