Jump to content
SAU Community

Recommended Posts

Hi Fellas...

I've had a crack at the search function but it's a bit too vague I'm having trouble matching others' problem with this one.

First of all, this problem doesnt occur all the time. It seems to be pretty random.

After an aggressive shift into 2nd (and sometimes but rarely, right into 3rd as well) the entire car will shudder all the way through the gear. I'll feel it in my seat, its not a huge shudder but def. noticable. The car doesn't lose power throughout. Put it into the next gear and it goes away.

One thing of note, is I'm aware that one of my fear subframe bushes have ruptured (the Gel filled ones). I have the new part ready to go, but they are not in yet. >Could this cradle movement be a potential cause of the problem?<

Keen to hear if anyone has had a similar issue. Thanks heaps guys.

Andrew

does it feel like you have haps out of balance wheels?

mine does that. just the atessa cutting in while theres no need to. it shudders the whole car. just happens randomly when driving and go over a bump etc etc.

just lift the throttle and the torque will go back to 0

Hi Fellas...

I've had a crack at the search function but it's a bit too vague I'm having trouble matching others' problem with this one.

First of all, this problem doesnt occur all the time. It seems to be pretty random.

After an aggressive shift into 2nd (and sometimes but rarely, right into 3rd as well) the entire car will shudder all the way through the gear. I'll feel it in my seat, its not a huge shudder but def. noticable. The car doesn't lose power throughout. Put it into the next gear and it goes away.

One thing of note, is I'm aware that one of my fear subframe bushes have ruptured (the Gel filled ones). I have the new part ready to go, but they are not in yet. >Could this cradle movement be a potential cause of the problem?<

Keen to hear if anyone has had a similar issue. Thanks heaps guys.

Andrew

Check all drivetrain mounting points from the engine mounts back or clutch.

Edited by Spoolemup
no comparison to a GTR i know but my R31 started doing it when i put my rb25det in.....it turned out to be the centre bearing in the tailshaft.

food for thought.

how much did it cost for you to get this fixed?

I know completly different cars and all, but my old 83 telstar did the same thing. It got worse over time. It turned out to be the torsion springs in the clutch were shagged and the clutch needed to be replaced.

My two cents (might not help, or not be the problem. Just throwing it out there)

its definately not a traction issue? if not you need more power :P dont know if cradle movement will be the problem, but maybe its making a smaller shudder much worse... assisting the problem rather than creating it

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...