Jump to content
SAU Community

Recommended Posts

Hi, anyone know of anyone wanting to sell their 200sx?

Prefer the following.

Early S15 (Nov 2000 onwards to Mid 2001).

Already done 30-60k.

Spec-S, perhaps even Spec-R if the price is ok.

Black, Silver or Red.

Seller within 300km of Sydney.

No mods.

Please mail me if you have something. I'm in no rush for one at the moment as I'm actually enjoying going back to catching the train to work after my GTS-T was totalled :( .

Thanks! :)

The later 2002 models with only 15,000km are going for around $32k to $38k at dealers. I haven't seen any early S15's from Nov 2000 to 2001 floating around in all the online ad's so no idea what they might go for. I suspect perhaps $26k to $32k.

I'd be stoked if I could find a private sale for a Nov 2000 S15 in Black going for $26-28k. Perhaps something that had done higher kms.

I'm probably going to leave it for later as well. Perhaps even wait till the end of the year when prices will be more reasonable for the S15's.

The prices are a little differant here in QLD, but the 01/02 go for around $32k - $40k and anything before around $30k.

I have only seen 1 or 2 below $30,000...

I am going to get a modified one to try and save some money..

I'll let you know if i find anything..

I purchase the series 2 GTS-T fully modified for $36k which was actually a good deal considering the mods cost the guy about $20k on top of the standard series 2 price of about $28k+

Insurance gets a little nasty at your age.

Personally I don't want to ever modify my next car. Could just be that fact that I'm still feeling a little rattled by my accident and would rather be driving a little Mini Cooper right now.

It will pass...

Was it a modified one?

I looked into this and their isnt a great advantage, first of all you have to get an earlier model car then whats available here, and you end paying almost the same price anyway..

I couldnt justify myself buying a 1992/1993 model car for $30 - $30k when you can pick up a S15 01 with 15,000km's for the same price..

just_grouse i had a look on another forum and saw a couple of black S15's 2 mildly modified sold for $35k and standard one for around $32...

It's the $$$ commitment that's the big issue. The $36k lease I had was draining the income faster than I would have liked (didn't help when the R33 needed it's engine replaced...damn mods!).

$26k seems to be the sweet spot so I guess I'll just have to wait for the right car. The S15 is the only 200sx I like the look of, inside and out.

Silver-Arrowz - I'd be just has happy to drive an R32 GTR or RX7 even but that also doesn't fit the budget right now.

Time for a little begging to the boss for more wonga?

Bloody mortgage!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...