Jump to content
SAU Community

Recommended Posts

rb30 stainless steel manifold

2.6mm Thick, 45mm Piping

t04e turbo

3" Inlet Diameter : 2" outlet

Wet Floating Bush Bearings : 1/8 NPT oil inlet

T3 Flange : Fits T3 and T3/T4 Manifolds

Specs: .50 a/r compressor, .63 a/r turbine, .57 trim

Turbine wheel: Exducer: 2.48" Mayor : 2.89"

Compressor wheel: Exducer: 2.07" Mayor : 2.36"

wastegate38mm wastegate

this setup is good for 600hp ive changed the way i wanna go now so i have no need for all this as im sticking with an rb20

it all lives in my wreck so i gotta go round and take some photos and ill post them up when i get them

will sell separatly as long as all parts are accounted for but prefer to get rid of it all at 1nce

turbo $550

wastegate$150

manifold$510

all together $1100 neg

Link to comment
https://www.sau.com.au/forums/topic/151869-fs-t04e/
Share on other sites

rb30 stainless steel manifold

2.6mm Thick, 45mm Piping

t04e turbo

3" Inlet Diameter : 2" outlet

Wet Floating Bush Bearings : 1/8 NPT oil inlet

T3 Flange : Fits T3 and T3/T4 Manifolds

Specs: .50 a/r compressor, .63 a/r turbine, .57 trim

Turbine wheel: Exducer: 2.48" Mayor : 2.89"

Compressor wheel: Exducer: 2.07" Mayor : 2.36"

wastegate38mm wastegate

this setup is good for 600hp ive changed the way i wanna go now so i have no need for all this as im sticking with an rb20

it all lives in my wreck so i gotta go round and take some photos and ill post them up when i get them

will sell separatly as long as all parts are accounted for but prefer to get rid of it all at 1nce

turbo $550

wastegate$150

manifold$510

all together $1100 neg

wat brand turbo? used im assumin and whens it hit full boost?

Link to comment
https://www.sau.com.au/forums/topic/151869-fs-t04e/#findComment-2825422
Share on other sites

wat brand turbo? used im assumin and whens it hit full boost?

not too sure on the brand mate i brought it off ebay

never used it but ive been in a 32 running this turbo and it was unbeliveable

Link to comment
https://www.sau.com.au/forums/topic/151869-fs-t04e/#findComment-2827770
Share on other sites

how would this turbo go on a rb20???? pics???? where are you located????

im located in brisabane

it goes well on a rb20 makes full boost sumwhere around 3800 4200 i think from memory

i have gotten around to taking the pics yet

Link to comment
https://www.sau.com.au/forums/topic/151869-fs-t04e/#findComment-2827843
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Nah. Was just wondering if you were having a small stroke or if there was some slur/gaf/inside joke that I wasn't aware of.
    • That was a fark up, it's Salamanca Place I was thinking of. And now I'm curious as to what potential slur/gaf I have caused with Salamander Road, ha ha!
    • Actually everyone on the roads was really well behaved. The only person that did any minor tailgating was a local hoon in a Turbo Focus. Unfortunately we weren't going the same way so there was no grand initial D touge battle. Lots of people pulled over and let me through. The amount of "Hey man nice car, omg skyline, nice 34 man woo" was suprising. Like really suprising. Like almost annoying. My partner was obviously surprised, she'd never seen anyone in the real world point out the car/like the car/want to chat about the car before, so to have like 3 people per day mention it was notable, I could finally say SEE? SOMEONE THINKS THEY'RE COOL. Everyone was also pretty suprised about the weather. Every day was dry and about ~13-14C. Mount Wellington had a sign that said they close the gates at 9pm and I was heading up there at about ~7:30. It was VERY apparent that conditions were getting significantly worse by the minute on the way up and down. The road on the mountain was terrible though, it's no driving road. I have various suspension related questions now. Luckily it was only about 20 minutes from where we were staying to the top of the mountain as said Google maps. We only had the 2 nights in Hobart. We went to the Farm Gate Market though which was really good - And went down to the Hastings Thermal springs/caves down there during the day. I'd definitely be up for going back again, so luckily there's a few more sights yet to see. Didn't get to do the west coast/queenstown/cradle mountain so this was supposed to be a 'scouting' trip anyway of sorts if I were to one day do/take part in/organize a more car-focused trip. As for the boat, it wasn't bad. Well it was bad, but not in the way you're thinking. We did the night trip which leaves at 6:45 (though you have to be there ~2 hours earlier) and arrives the next morning at about 6am. There is nothing to do on the ship. If you plan accordingly and bring a book/tablet/show to watch/charger you can just chill out, take some Travacalm and just sleep through it. The food there is an extremely basic buffet that costs $32 a plate, or $14 for a $3 pizza. The way back we had a travel kettle and a few different types of cup noodles and made our own tea/coffee in the room. This was a far superior way to do it. At the very least book one of the rooms with beds. I guess as we were in the off season we didn't have room mates. You get an option for rooms with 4 beds (2x bunks) or a room with just the two bottom beds. There's also some option for a deluxe queen bed but it's much pricer. We've been on sleeper trains in Asia before so we figured this is similar (and it was)
    • You just gotta be really, really, really clear and decisive with what you want your end product to be. 99% of people who want this conversion aren't "I want to run a 295 front tyre!" so they don't really need the widebody. They just want the OEM body to look a little less dumpy, so bonnet, bar, skirts job done with some camber, stretch, slam. It's when you want that, but then decide to pivot later you get big problems. See also if you're willing to get an all in one fibreglass bar, and you're willing to accept fibreglass problems like cracking the entire item on a driveway, instead of just a piece attached to the bottom, etc etc etc. Decide this all before buyin'.
×
×
  • Create New...