Jump to content
SAU Community

Recommended Posts

Well. I think I did the best thing I could have possibly done. I went to Darra and it was actually a Truck inspection site so they didn't really know what they were doing.

SO...

I handed him the slip... He said that I needed to take him for a drive around the block to check it. BUT there were two trucks in front of me and only 30 minutes till knock off time.

So he took the defect slip.. Asked me to pop the bonnet. I think he tried to catch me out here saying that he didn't know where hte BOV's were.. could i show him.. So as the mechanic that I am.. I showed the inspector where the standard BOV is and showed him the one we took off sitting in the back seat.

Then asked me to rev it. So I revved it to 3grand and then let of slowely so it didn't make a noise and thats it.. I drove away!

And thats my exciting trip to DOT!

Link to comment
https://www.sau.com.au/forums/topic/1540-defected/page/3/#findComment-35583
Share on other sites

  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

Guest | hype^ |

im glad i hopfully will never have this prob..

my blitz bov is right under my std. airbox intake, which will stay there when i get my A'pexi filter and custom carbon airbox

:D

you gotta look really hard to find the bov if u dont know its there.. and i still have my old one on.. :uh-huh:

Link to comment
https://www.sau.com.au/forums/topic/1540-defected/page/3/#findComment-35965
Share on other sites

Originally posted by | hype^ |

im glad i hopfully will never have this prob..  

my blitz bov is right under my std. airbox intake, which will stay there when i get my A'pexi filter and custom carbon airbox

:)

you gotta look really hard to find the bov if u dont know its there.. and i still have my old one on..  :uh-huh:

- I know of alot of people doing this atm... dammit.. not log

before the cops get onto it.. dammit.

Link to comment
https://www.sau.com.au/forums/topic/1540-defected/page/3/#findComment-36813
Share on other sites

Guest | hype^ |
Originally posted by JiMb0

Hype, you planning on constructing that carbon box yourself or buying one pre-made ? exactly what I'm looking for at the moment... Also Mighty does have a point, then again I got a mate who works on Toyota's all day and wouldn't know **** about Nissan's .....

im gonna get my dad to make, he know all about carbon fibre coz he uses it to make his model airplanes, it using the tamplete from these forum (sorry i forgot who posted it :( ):D

dont bother buying it JIM it aint worth it. i saw the carbon ones at UAS for $300+ stuff that!!:)

Link to comment
https://www.sau.com.au/forums/topic/1540-defected/page/3/#findComment-37700
Share on other sites

Guest | hype^ |
Originally posted by XrSiSt

- I know of alot of people doing this atm... dammit.. not log

before the cops get onto it.. dammit.

bah F*** EM ALL... :)

stupid cops worry about a little PSSSSHH or induction noise instead of stopping ppl getting stabbed, shot , robbed, etc etc:mad: :shake:

Link to comment
https://www.sau.com.au/forums/topic/1540-defected/page/3/#findComment-37701
Share on other sites

Originally posted by carlo

I was told its now illegal to have a bov that breaths out externally, it has to be plumbed back into the cars air filter.

they say its for noise reasons, but how is it that busses do the same thing at sound levels which cause your ears to bleed.

Atmo venting BOV's have always been illegal. They alter the air/fuel ratio as well as the noise associated.

Link to comment
https://www.sau.com.au/forums/topic/1540-defected/page/3/#findComment-37995
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...