Jump to content
SAU Community

Recommended Posts

Item: 1993 nissan r33 skyline 4 door 5 speed manual gtst

sold

Location: Brisbane Northside

Website: none

Item Condition: great, just finished build up

Reason for Selling: i only get to drive it once a week due to work and my daily drive has had it

Price and Payment Conditions: $21000 ono with safety cert(to be obtained once deposit taken)

or $18500 minus stereo and 5inch tacko

Extra Info: one of a kind, 4 doors are rare enough let alone a manual with this style of mods

Pictures: yes

Contact Details: mob 0439719822 or email [email protected]

post-9561-1170230263.jpgpost-9561-1170230242.jpgpost-9561-1170230224.jpgpost-9561-1170230112.jpgpost-9561-1170230146.jpgpost-11192-1129622603.jpgpost-9561-1170230286.jpgpost-9561-1170230308.jpg[attachmen

=80158:attachment]post-9561-1170230359.jpg

General -

1993 4 door gtst

5 speed manual

85xxxkm

paging alarm system

major service will be done apon sale

only arround 10xxxkm done in aust as it's been off th road for mods

balance of rego

The body -

custom purple with blue pearl

custom side skirts and rear bar

aftermarket front bar obtained through custom carbon

custom front guards

series 2 rear tail lights

aftermarket front grill

custom bonnet (all metal not defectable like carbon)

carbon fibre look mirrors

custom graphics

The interior -

combination of white leather/vinyl/and paint

leather roof lining, dash, door trims, centre console, steering wheel (issotta) gear and handbrake boots, rear parsel shelf and a few other bits

white vinyl boot install, sub box false floor/walls ect

white/blue paint dash cluster and a few other bits

The sound system

Clarion touch screen head unit (flod out tv, cd, ect)

luxun dvd player also plays mp3/mp4/cd

alpine type r 6.5 inch front splits

alpine 6.5 inch type s rear splits

3 12 inch alpine type s subs

alpine 4 channel v12 amp (bridged running front splits)

alpine mono block 800w rms (running 3 12's supplying approx 1350wrms)

fusion capacitor

Mechanical mods -

hybrid front mount intercooler

apexi avcr

xforce stainless exhust including front pipe

heavy duty clutch

jjr oil cooler and oil filter relocator

hks pod filter

dredd racing cold air box (encolosed pod filter making it legal in qld)

autometre colbot gauges 5 inch shift light tach, oil temp oil pressure, water temp air/fuel ratio (these 4 mounted in dash above glovebox)

Wheels tyres -

18inch speedy lite 7's i think

6mm spacer plate on front

235's in great condition all round

may consider trades with cash my way or straight swaps

post-9561-1170230189.jpg

post-9561-1170230333.jpg

Edited by teamplasma
Link to comment
https://www.sau.com.au/forums/topic/154238-sold/
Share on other sites

  • 2 weeks later...


  • Similar Content

  • Latest Posts

    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
    • @PranK can you elaborate further on the Colorlock Dye? The website has a lot of options. I'm sure you've done all the research. I have old genuine leather seats that I have bought various refurbing creams and such, but never a dye. Any info on how long it lasts? Does it wash out? Is it a hassle? What product do I actually need? Am I just buying this kit and following the steps the page advises or something else? https://www.colourlockaustralia.com.au/colourlock-leather-repair-kit-dye.html
    • These going to fit over the big brakes? I'd be reeeeeeeeaaaall hesitant to believe so.
    • The leather work properly stunned me. Again, I am thankful that the leather was in such good condition. I'm not sure what the indent is at the top of the passenger seat. Like somebody was sitting in it with a golf ball between their shoulders. The wheels are more grey than silver now and missing a lot of gloss.  Here's one with nice silver wheels.
    • It's amazing how well the works on the leather seats. Looks mint. Looking forward to see how you go with the wheels. They do suit the car! Gutter rash is easy to fix, but I'm curious about getting the colour done.
×
×
  • Create New...