Jump to content
SAU Community

Recommended Posts

It may have a stuffed plate or two if its dented badly enough.

My battery that was leaking was bloated also. Zero overcharging and usual engine bay temps. Its suspected it may have been dropped prior to purchase.

So maybe the mechanics not to blame? Was fine before i went there tho. This sux going from a swanky engine bay to one like my toyota corona ( giv or take a little ). Be good if they were at fault just so i can have things fixed, will be seeing him sometime this week. He still thinks its the alternator!

Well for those of you who are interested, i saw my mechanic and he denied topping the battery up. My alternator was fine aswell. I then went to a battery mob and he confirmed that the battery was overfilled! Causing the battery to swell when its trying to gas and then spurting acid out of the breather holes!! So i bought a new battery and has been fine since. Not sure what to do now bout the mess its left my engine bay and front bar in? The mechanic's just going to deny topping it up again! Any suggestions????????????

Ring the mechanic and tell him what the battery bloke has said.

Then state you won't be taking your car back to him and will be suggesting to every one you know not to take it there either.

Here Here, I do agree, unfortunatly there is not much that can be done about it unless you can prove they did fill it up! looks like your gonna need to re paint yourself bro! :laugh:

Ring the mechanic and tell him what the battery bloke has said.

Then state you won't be taking your car back to him and will be suggesting to every one you know not to take it there either.

if you tell 10 people who tell 10 people soon enough a lot of people know i cant count past 10 :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...