Jump to content
SAU Community

- Sold - *new* Dba 4000 Slotted Rotors. 280mm Front Rotors For R32 Gts-t

dan.1337
 Share

Recommended Posts

dan.1337 Proficient

dan.1337

Posted
Posted (edited)

I've got my 280mm front R32 GTS-T rotors for sale.

They're the DBA 4000 slotted rotors with 0 k's on them. All I did was unpack them and clean them with a non-oil based cleaner but decided not to put them on my car due to financial reasons.

Asking for $360 for both corners - this is almost cost price. I'm quite firm on the price but if a close enough offer is made, i'll let them go.

Don't let this opportunity get away! My loss is your gain. All receipts and packaging provided.

4dox1j4.jpg

47dkf1g.jpg

Contact me on:

M: 0402502537

E: [email protected]

or PM

Feel free to ask questions.

Edited by dan.1337
DC_GTST Experienced

DC_GTST

Posted
Posted

Can offer between possibly $300-350. Can you post to SA if it all works out? And these are a direct swap with normal R32-gtst brake rotors? Is there any websites in which i can check information on these rotors?

dan.1337 Proficient

dan.1337

Posted
  • Author
Posted
According to DBA these will also fit a Nissan S15 2.0lt Silvia from 1999 on...

best of luck with the sale, if they'd fit a 33 I would have bought em....

Thanks =)

Can offer between possibly $300-350. Can you post to SA if it all works out? And these are a direct swap with normal R32-gtst brake rotors? Is there any websites in which i can check information on these rotors?

Give this a try: http://www.dba.com.au/2006/products_4000.asp

They're a direct swap with the r32 gts-t rotor. I can post it to SA at the buyers expense - but i'm not sure how much that'll cost. I'll let u choose your own courier/postal service. I'd take $350 at a minimum considering these are so cheap as it is.

I payed $599.00 for mine...:P((((( form RACING BRAKES, and he gave me 10% discount as SAU member.

Cheers

EUGEN

hahah that just goes to show how much of a bargain these are =P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Manur33
      Rb25det coil loom wire identification

      By Manur33 · Posted

      Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • davemoto63
      Stagea choice's which model??

      By davemoto63 · Posted

      Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • davemoto63
      Noobie Stagea owner..

      By davemoto63 · Posted

      Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...