Jump to content
SAU Community

Recommended Posts

Hey all,

I changed my spark plugs to NGK iridium (.8 gap), and am finding that at idle and down low the car seems lumpy.. Almost like I have put a new cam in it, also I have noticed the exhaust note seems to have more definition (for lack of a better word)..

The car seems to be running well, its just down low and off boost it feels weird.

Any suggetsions as to what this could be.. Is it just the new plugs (the old ones where very old a shitty), maybe a timing thing??

Cheers

Link to comment
https://www.sau.com.au/forums/topic/17047-spark-plug-question/
Share on other sites

Originally posted by Doctor

I changed from 7's to 6's yesterday and my god what a difference. Better start up, idle as smooth as power delivery more linear.

Then try going to 5's. I just went from a heat range of 5 to 6 and I dont like it! :D

I'll be going back down to a heat range of 5 again, so much smoother....

I found that once the car warmed up, idle was smoother, and that the plug didnt foul as quickly. It also significantly reduced the misfire at the 5000rpm mark seen by R33's with VVT (not that it applies to you :D ).

So in answer to your question, yes!

Temps were just the same, noticed no difference.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
×
×
  • Create New...