Jump to content
SAU Community

Recommended Posts

Firstly let me say hi! i am new on these forums and have just purchased myself a very neat R33 GTST - and needless to say am a happy as can be!

Was hoping a few knowledgable people could help with a question i have about my rear camber..

As my car has been lowered with new coilovers, my rear camber has been thrown out a lot and now the tyres sit like this /----\ (lol..) and i am a bit unsure as to what kits are available / best suited for my car.

MRT in rhodes are telling me to go with a Whiteline adjustable kit.. though i am not sure on the specs yet.

I have done a quick search about camber kits but i am at a bit of a loss because suspension is realy not my forte' :)

Thanks in advance dudes, and i will surely see some of you on the upcoming events!

Link to comment
https://www.sau.com.au/forums/topic/172879-lowered-camber/
Share on other sites

How low is the car? Centre of wheel to guard? If it is around 340mm, you can correct the camber using the Whiteline adjustable bushes ($135RRP) as they offer +/-0.75deg adjustment. If the car is lower than this, you can either get 2 camber kits (bushes for both inner and outer joints of the arms) or you can buy the Whiteline adjustable upper arms ($300RRP from Autobarn) which offer a lot more adjustment.

If you just want the bushes, have a look in the groupbuy section, "Sydneykid" is running groupbuys for Whiteline/Bilstein/Eibach/Noltec stuff.

Link to comment
https://www.sau.com.au/forums/topic/172879-lowered-camber/#findComment-3182206
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
×
×
  • Create New...