Jump to content
SAU Community

Recommended Posts

I was.....

It appears you don't understand what happened..... the police blocked off both ends of the road and directed everyong through the carpark and checked thier cars - some were sent to Carrington RTA and others were issued defect notices for things like unenclosed pods, BOV, A pillar guages, exhaust etc..... I was waved through and told I didn't have to go into the carpark, so was my other half in his car behind me and a friend of ours behind him..... someone else I know who was with us had bald tyres, broken headlights and other stuff and was also let go with nothing - ALOT of cars were inspected but not all and ALOT of people were given verbal warnings - you make it sound like the police have a personal vendetta against you...?

It was a typical rta/police defect station set-up. They do it regularly..... the hotspot on the coast for these 'random defect stations' is Terrigal but every dick and his dog in any sort of car who goes for a cruise to the coast - GOES TO TERRIGAL!!!

Sounds to me like you are familiar with your local po po and maybe have a grudge.....

Just my 2 cents :(

No offense but when ur old man is a copper you tend to know abit bout how they work.I have a gtr that is near stock.I could tell they were lookin for something to do me for.Seriously,who cars if a car is lower than the norm theres no reason to harrass someone for it.When uve had as many highly modified car as i have mate thats when u can dribble your dribble

  • Replies 77
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

No offense but when ur old man is a copper you tend to know abit bout how they work.

Your old man's a cop, yet you refer to people like him as "stupid morons" that should "get off there high horse n come back to reality"?

Has someone got replacement globes for the #2438 model of bullshit detectors? Mine just blew.

Edited by scathing
No offense but when ur old man is a copper you tend to know abit bout how they work.I have a gtr that is near stock.I could tell they were lookin for something to do me for.Seriously,who cars if a car is lower than the norm theres no reason to harrass someone for it.When uve had as many highly modified car as i have mate thats when u can dribble your dribble

No offence taken - like I said, I WAS THERE but of course I believe that YOU would know more about it than me..... ;)

oh and re the highlighted bit above..... it appears you presume yourself to have some sort of "seniority"..........

  • 3 weeks later...
No offence taken - like I said, I WAS THERE but of course I believe that YOU would know more about it than me..... :)

oh and re the highlighted bit above..... it appears you presume yourself to have some sort of "seniority"..........

not at all mate.See the thing is i can drive down the rd in my gtr n not worry bout havin n engineers certificate.But with my other cars that arent a standerd off the shelf car uve kinda got something to be scared of.Seniority i dont think so sweetheart

what is going on ? tension Ok who needs a smack? How many cars have you owned travis?

In regards To those that are pissed for being pulled over for no reason you have to stop and think for a min you drive an import and this is not new that people have been pulled over for no reason. I was driving down the road the police car torr up the street to catch up to me and pulled me over said hey your exhaust looks too low follow us to the inspection station.

They where very nice to me but that might be because I am bigger then most people but I spoke to them in a reasonable manner and was helpful towards the police and RTA personnel I still got done for Pod filters but they explained to me what was legal and not legal and if need too and if possible to get a engineers certificate.

One police officer said that persons driving Import cars, Modified cars Including Blinged commodores etc will be pulled over and inspected because almost every time you change something on a car is breaking the law in most cases. I understand but don’t like it but when the RTA guy came over and said seriously how many race cars do you see driving around the streets at night etc 99% of the time none these cars cruising around music blaring etc are and usually drivers are out to have fun and socialise but on a majority of the time are going to be breaking the law so that is why they target Skylines and such not to stop people in owning them but to cut down on the accidents / deaths and the illegal racing that happiness but the funny thing about this is I don’t think it is the skylines they need to worry about any more it is the commodore drivers

not at all mate.See the thing is i can drive down the rd in my gtr n not worry bout havin n engineers certificate.But with my other cars that arent a standerd off the shelf car uve kinda got something to be scared of.Seniority i dont think so sweetheart

Hello my little friend,

You've been on this forum for all of five minutes and have succeeded in making one bullshit meter blow up, one of my friends laugh, another one yawn and addressed my wife with sweetheart, mate and implied that she talks dribble.

Did you join the forums to talk down to people and be a keyboard warrior, or to meet like minded people with a similar interest in the cars we all have a passion about??

If you pay attention to a few of the posts in this thread, it seems apparent that some of our club members think you are the one that is talking dribble. Dont make a hobby out of it if you expect to be a welcomed part of our community. Alot of us have little time for the bad attitudes that sometimes accompany new users of our forums with their new found toys. The blindingly obvious part of this thread you should pay particular attention to is the fact that you have a very strong opinion on an event that you were not even there to witness and proceed to talk down to the people who were at Newcastle that night (I was there too) like a know all. This is a public forum and peoples opinions will differ from time to time on certain subjects and if you cant deal with that in a grown up manner you should prob go and hangout on myspace with all the other kiddies.

And just incase you havent got the jist of this post, it saying "Pull your head in boofhead!" and drop the attitude. You'll get alot further if you do.

My 20 cents.

right on nuttsHunglow

this man knows his stuff......

I totally agree with what your on about...

We are just unlucky for loving such a beautiful machine and getting pumped up the rear end due to a few morons on the roads

Yeh commodore drivers have always been more of a hoon kinda creature then us skyline drivers ;)

(i assume your talking about the fools that where racing on great western highway in the commodores and killed that elderly couple)

Hey,

Look to everybody ive pissed off.Im sorry,i admit that ive been a dickhead.I just get my back up abit when ppl put shit on me.I didnt mean to cause any shit.I understand if yas decide to hate me.No worries if yas do.Yeh once again im sorry just hope you ppl are as nice as everyone says n we can move on.Like i said i didnt mean to cause any shit just must have been the way it come across.

Hello my little friend,

You've been on this forum for all of five minutes and have succeeded in making one bullshit meter blow up, one of my friends laugh, another one yawn and addressed my wife with sweetheart, mate and implied that she talks dribble.

Did you join the forums to talk down to people and be a keyboard warrior, or to meet like minded people with a similar interest in the cars we all have a passion about??

If you pay attention to a few of the posts in this thread, it seems apparent that some of our club members think you are the one that is talking dribble. Dont make a hobby out of it if you expect to be a welcomed part of our community. Alot of us have little time for the bad attitudes that sometimes accompany new users of our forums with their new found toys. The blindingly obvious part of this thread you should pay particular attention to is the fact that you have a very strong opinion on an event that you were not even there to witness and proceed to talk down to the people who were at Newcastle that night (I was there too) like a know all. This is a public forum and peoples opinions will differ from time to time on certain subjects and if you cant deal with that in a grown up manner you should prob go and hangout on myspace with all the other kiddies.

And just incase you havent got the jist of this post, it saying "Pull your head in boofhead!" and drop the attitude. You'll get alot further if you do.

My 20 cents.

I understand mate.If you got offended by me calling ppl mate n sweetheart etc.I guess we aint gonna get along.Thats me.I did join the forum to meet new ppl and potentially make friends n stuff n like i said,im sorry just hope we can be friends n get over it.

I understand mate.If you got offended by me calling ppl mate n sweetheart etc.I guess we aint gonna get along.Thats me.I did join the forum to meet new ppl and potentially make friends n stuff n like i said,im sorry just hope we can be friends n get over it.

Internet conversations can suck and can be taken the wrong way but at least he has apologised for his mistakes :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
×
×
  • Create New...