Jump to content
SAU Community

Brand New D2r Hid Globes, Direct Drop-in For R34's With Factory Hid, 2 X 6000k And 1 X 8000k

666DAN

By 666DAN,
in Classifieds

 Share

Recommended Posts

666DAN Grand Master

666DAN

Posted
Posted

As the title says, these are brand new drop-in replacements for those highly expensive HID D2R factory globes.

Can be replaced in minutes, I've got

2 x 6000K sets (very white)

1 x 8000K set (slight blue hue) SOLD

$75 for a set (2 globes) delivered express throughout Australia.

Fujiwara Proficient

Fujiwara

Posted
Posted (edited)

Hey Dan, how do these compare with the stock HID's? (The 6000k ones)

And would it match the color of your LED's?

Edited by Fujiwara
666DAN Grand Master

666DAN

Posted
  • Author
Posted
Hey Dan, how do these compare with the stock HID's? (The 6000k ones)

And would it match the color of your LED's?

They're very close in colour to the LEDs actually, I always think (being fussy) the stock HID are slightly less blue than the LEDs. This could be due to age of my factory ones though. Also the new bulbs have a slight colour shif after 500 hours and get a bit white-bluer.

666DAN Grand Master

666DAN

Posted
  • Author
Posted
Got decent white (but not noticeably illegal) replacements for halogens? Bastards at compliance never returned my Xenons...

Sorry no halogens, only HID

666DAN Grand Master

666DAN

Posted
  • Author
Posted
whats the kelvin rating on the stock HID's?

And can the wiring/loom handle 8000k

8000K refers to the colour temperature, they don't use any more current load than the stock globes, these are 35W just the same.

I've heard figures of 4200-4700K for stock...I'm tending toward the 4700K

53XYN Veteran

53XYN

Posted
Posted (edited)

i got 2 sets of dan awsome xennon bulbs .. huge diff over stock 4200k xennons.. thanks a bunch bud for them :banana: well worth the money

P.S my fatory booklet states mine was a 4200K maybe the earlier ones were different??.. 8000K is worth it :yes:

Edited by 53XYN
666DAN Grand Master

666DAN

Posted
  • Author
Posted
does the 8000k still light up as much or more as the standard ones?

I haven't done the 6000K side by side with the 8000K, but it was brighter than the stock ones, just with a bluer tinge to it. My stock ones are older though and probably getting toward the end of their useful life.

53XYN Veteran

53XYN

Posted
Posted (edited)

Dan just letting you know i found my steaga S2 lights they use D2R as well your 8000K ones fit in Steaga perfectly exact same setup as 34

S2 Steaga are Xennon Series one stock H4 or H1..

Edited by 53XYN
Black Ninja Experienced

Black Ninja

Posted
Posted
whats the kelvin rating on the stock HID's?

And can the wiring/loom handle 8000k

I used a stock loom for 9000k with no problem at all.. :cool:

Fujiwara Proficient

Fujiwara

Posted
Posted

i tried to take out my globes today and found out that there is a star shaped allen like key thing there.

WHERE THE HELL DO I GET ONE AND WHAT SIZE IS IT!!!???

Can any of you guys help me? As i'm getting a set off dan.

Cheers

Black Ninja Experienced

Black Ninja

Posted
Posted
i tried to take out my globes today and found out that there is a star shaped allen like key thing there.

WHERE THE HELL DO I GET ONE AND WHAT SIZE IS IT!!!???

Can any of you guys help me? As i'm getting a set off dan.

Cheers

I just use a plier to bend the plastic stopper and turn anti-clockwise.. :D

Fujiwara Proficient

Fujiwara

Posted
Posted
I just use a plier to bend the plastic stopper and turn anti-clockwise.. :P

i don't want to be doing that.

knowing me, i'd break alot of things

666DAN Grand Master

666DAN

Posted
  • Author
Posted
i don't want to be doing that.

knowing me, i'd break alot of things

You turn the cover with one hand, keeping pressure on it, flip the plastic tab with your finger slightly and it'll jump over the screw. When you do it up, just don't force it past when you screw the cover back.

Fujiwara Proficient

Fujiwara

Posted
Posted
You turn the cover with one hand, keeping pressure on it, flip the plastic tab with your finger slightly and it'll jump over the screw. When you do it up, just don't force it past when you screw the cover back.

Hey ,mate.

Just sent the payment through.

Please send me a set of 6000k globes.

Also which way do i turn the covers and how much do i turn them to take it off?

Is there no place that sell the star shaped allen keys? :laugh:

 Share
Go to topic listing


  • Latest Posts

    • Duncan
      S1 rb25/s14 starting problem

      By Duncan · Posted

      Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Sorry. Front brake calipers
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...