Jump to content
SAU Community

Brand New D2r Hid Globes, Direct Drop-in For R34's With Factory Hid, 2 X 6000k And 1 X 8000k


Recommended Posts

As the title says, these are brand new drop-in replacements for those highly expensive HID D2R factory globes.

Can be replaced in minutes, I've got

2 x 6000K sets (very white)

1 x 8000K set (slight blue hue) SOLD

$75 for a set (2 globes) delivered express throughout Australia.

Hey Dan, how do these compare with the stock HID's? (The 6000k ones)

And would it match the color of your LED's?

Edited by Fujiwara
Hey Dan, how do these compare with the stock HID's? (The 6000k ones)

And would it match the color of your LED's?

They're very close in colour to the LEDs actually, I always think (being fussy) the stock HID are slightly less blue than the LEDs. This could be due to age of my factory ones though. Also the new bulbs have a slight colour shif after 500 hours and get a bit white-bluer.

Got decent white (but not noticeably illegal) replacements for halogens? Bastards at compliance never returned my Xenons...

Sorry no halogens, only HID

whats the kelvin rating on the stock HID's?

And can the wiring/loom handle 8000k

8000K refers to the colour temperature, they don't use any more current load than the stock globes, these are 35W just the same.

I've heard figures of 4200-4700K for stock...I'm tending toward the 4700K

i got 2 sets of dan awsome xennon bulbs .. huge diff over stock 4200k xennons.. thanks a bunch bud for them :banana: well worth the money

P.S my fatory booklet states mine was a 4200K maybe the earlier ones were different??.. 8000K is worth it :yes:

Edited by 53XYN
does the 8000k still light up as much or more as the standard ones?

I haven't done the 6000K side by side with the 8000K, but it was brighter than the stock ones, just with a bluer tinge to it. My stock ones are older though and probably getting toward the end of their useful life.

Dan just letting you know i found my steaga S2 lights they use D2R as well your 8000K ones fit in Steaga perfectly exact same setup as 34

S2 Steaga are Xennon Series one stock H4 or H1..

Edited by 53XYN
whats the kelvin rating on the stock HID's?

And can the wiring/loom handle 8000k

I used a stock loom for 9000k with no problem at all.. :cool:

i tried to take out my globes today and found out that there is a star shaped allen like key thing there.

WHERE THE HELL DO I GET ONE AND WHAT SIZE IS IT!!!???

Can any of you guys help me? As i'm getting a set off dan.

Cheers

i tried to take out my globes today and found out that there is a star shaped allen like key thing there.

WHERE THE HELL DO I GET ONE AND WHAT SIZE IS IT!!!???

Can any of you guys help me? As i'm getting a set off dan.

Cheers

I just use a plier to bend the plastic stopper and turn anti-clockwise.. :D

I just use a plier to bend the plastic stopper and turn anti-clockwise.. :P

i don't want to be doing that.

knowing me, i'd break alot of things

i don't want to be doing that.

knowing me, i'd break alot of things

You turn the cover with one hand, keeping pressure on it, flip the plastic tab with your finger slightly and it'll jump over the screw. When you do it up, just don't force it past when you screw the cover back.

You turn the cover with one hand, keeping pressure on it, flip the plastic tab with your finger slightly and it'll jump over the screw. When you do it up, just don't force it past when you screw the cover back.

Hey ,mate.

Just sent the payment through.

Please send me a set of 6000k globes.

Also which way do i turn the covers and how much do i turn them to take it off?

Is there no place that sell the star shaped allen keys? :laugh:



  • Latest Posts

    • Certainly seen bigger digs lol, Thanks for the heads up. Appreciate it
    • Booked in the old girl for some bosh motorsport abs     
    • Sorry to dig up an old post, these seats do not sit inline with the steering wheel so expect them to be offset towards the door. Also they sit a lot higher than the factory seats. There is a datasheet available online that confirms this. Can also advise be careful who you purchase from if you get them from a distributor in Australia, the company I purchased from in Sydney is no longer listed as a Bride distributor and I understand why, there was zero support from them.
    • You weren't kidding about the long block, what a difference it made!! I fixed every dent almost and all of them except for one and it feels 100% smooth on the others! I just need to fix one up and put some guide coat. Thanks a lot, that was game changing and time saving. 
    • I got a quote to refurbish some BBS look-alikes -best part of 2k. I had some alloys sand blasted - bad idea, in retrospect. Had to wear gloves to handle them! I had them powder coated to protect the rim. Rather than sand blasting, I recommend hydro blasting (blasted with micro-fine glass beads carried in a water stream). I had a set of TRX rims done recently for only about $200 total.
×
×
  • Create New...