Jump to content
SAU Community

Recommended Posts

Item:

Nissan Cefiro rb20det ENGINE ECU

Location:

Springfield Lakes / Milton

Reason for Selling:

i have a skyline RB20DET engine in my silvia and the cefiro ecu wont work with it.

Price and Payment Conditions:

$300 ono (dont know what these are worth but the mechanic said roughly $300..)

Pictures:

pictures to come... but its an ECU...

Contact Details:

0412 21 0412 or [email protected]

Item:

Nissan rb20det SKYLINE ECU for the AUTO gearbox...

THIS IS NOT AN ENGINE ECU!!! its for the auto gearbox.

Location:

Springfield Lakes / Milton

Reason for Selling:

I have a manual shift kit for the auto in my silvia... therefore, i have no need for this.

Price and Payment Conditions:

$100 ono (dont know what these are worth..)

Pictures:

pictures to come... but its an ECU..

Contact Details:

0412 21 0412 or [email protected]

i'm keen to get rid of these asap... so throw me an offer and we can talk... :action-smiley-069:

cya

ash

Link to comment
https://www.sau.com.au/forums/topic/178668-r32-auto-ecu-and-cefiro-engine-ecu/
Share on other sites

  • 2 weeks later...


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...