Jump to content
SAU Community

Recommended Posts

hey heey

i am in desperate need of a complied r32 gt/r/st shell that is clean with no records or anything. needs to be complied and registerable!

i rrrrrrrrrrrreallly need it so someone present me with something. i live in brisbane so if there is someone here with one that would be awesome too !!!

cmon cmon cmon lets get it going people!!

shoot us a pm or something!!

lets go!!

dan

Link to comment
https://www.sau.com.au/forums/topic/178775-wtb-qld-32-gtr-bare-shell-urgent/
Share on other sites

A1 nissan and Nissan Wrecking, they have shells but for a clean straight one with no panels just the shell, your looking at around 2k - 2.5k and the downfalls are is the losers there will try to be know it alls and try to give you lectures about "if your a drifter dont waste my time, dont you trust my judgement ....blah blah blah" i told him to get stuffed and not waste my time....

2 - 3 weeks ago zoom imports had an r32 gtr shell for $1500 but not in very good condition, but easy fixable

the thing to do is call up any nissan wrecking / import wrecking, anything as you will find one eventually

took me a week to find one (constant phone calls)

i ended up picking one up for $1100 few repairs needed but dont lose faith..... THERE OUT THERE!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
×
×
  • Create New...