Jump to content
SAU Community

Lookin For A Mechanic & Window Issue

RYD11R

By RYD11R,
in New South Wales

 Share

Recommended Posts

RYD11R Proficient

RYD11R

Posted
Posted

Hey All,

Could anyone recommend a reasonably priced mechanic to me? I live in Sydney's Western Suburbs and my old mechanic has decided to close down. My car is due for major service soon and i wanted to know if u guys could help me find someone who understands the cars but doesn't charge amounts like 1k for a timing belt change as a certain motor-sports workshop quoted me. I appreciate all advice/references given thanks.

In addition my drivers side window is playing up i dunno if its the motor or switch sometimes it works sometimes it doesn't so if anyone with an R32 is free to do a quick switch test then i can find out if its the motor or switch....

Thanks

Jason

Link to comment
https://www.sau.com.au/forums/topic/180954-lookin-for-a-mechanic-window-issue/
Share on other sites
Richieb Collaborator

Richieb

Posted
Posted

Try to do the belt ur self for $1k mate..!!

Window, Mmmm, mine has a little silly session occasionally, but I think its a cable/connector issue.

I'll let u try mine if you want to tho'.

RYD11R Proficient

RYD11R

Posted
  • Author
Posted
Try to do the belt ur self for $1k mate..!!

Window, Mmmm, mine has a little silly session occasionally, but I think its a cable/connector issue.

I'll let u try mine if you want to tho'.

Thanks Rich what i might do is go to SSS on saturday and ask them to borrow a switch to try....... But timing belt i dun want to rish fing my car up.....

Richieb Collaborator

Richieb

Posted
Posted

Timing belt can be done with a little care.

I changed mine with some good advice before-hand of course.

Take your time, get it right, get it checked if possible too.

I changed all seals, pulleys and belt... yep, I took best part of 4 hrs to do it, but now I have done it, I'd do it again.

I have to say thet it was a needs must job though. I noticed an oil leak, opened the cover, found a piece the size of my thumb-nail actually missing.

Actually suprised a few people with it to be honest, they could not believe I was still running the car... ahhhh..!, ignorant bliss!!

I do suppose it is an advantage when I have done many other belts on cars before I suppose, and yeap, I've had 'em snap before as well.

...... they call me Mr good-luck now though, we reakon we were power-tuning while this belt was shot..! Sooooo close to a $10k rebuild, and I never even knew it..!

D'oh!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      CD009 RB Conversion

      By TurboTapin · Posted

      The SS button head cap screw on the back? If so, good to know. I presumed it was there for basic assembly and nothing more. 
    • Kirby7887
      R32 GTR Lost All Interior Power to IGN Accessories

      By Kirby7887 · Posted

      Hello, everyone. I'm new to the forum. I have a 1989 Nissan Skyline R32 GTR. I have lost all power to the interior, including AC controls, the gauge cluster, turn signals, and windows. Stuff that still works includes the horn, brake lights, radio, and headlights. All fuses, in the interior and exterior boxes, tested good.  It starts and runs fine, just with no gauge power or anything stated above. No warning lights either. Things that I have tested: - Fusable link tested fine - No other fuses blown - Alternator good - IGN switch tested fine - With my power probe, I can backfeed power through the IGN pin to the plug on the back of the gauge cluster, and everything comes back on.    So my theory is something on the control side that sends the ignition power through the system isn't doing its job, or a wire is broken. (I would think that it is the ignition switch that would do that, but who knows?). The ignition relays don't fire (all relays tested good). So what tells them to fire other than the IGN switch?  I would really appreciate it if someone had some insight on this. I have tons of hours into this; I don't want to give up in defeat! I have the HD wiring diagram, but having all those wires laid out like that on one sheet of paper makes things pretty hard to follow.  Thanks for reading, and thanks for the replies.  Where should I look next? Thanks.
    • Dose Pipe Sutututu
      Mistakes were made, my R34 Story

      By Dose Pipe Sutututu · Posted

      Install a MAP sensor pre and post throttle. Best data you could have for NA, then play with the bends and/or air box and see how much of inflection is created at WOT on the plot.
    • fatz
      Beers and skylines Fatz style

      By fatz · Posted

      And gone to a new home  
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      The car remains in paint jail. I am now pretty convinced that the whole "RB25 Airboxes are kinda limiting to ~300kw" could be a thing. Also saw a good video from Engine Masters: (Sorry for FB link) (https://www.facebook.com/watch/?ref=search&v=761771519471924&external_log_id=c10bcbb6-2c39-4ff3-9240-287e9921fde6&q=Cold Air Considerations) Where they tested Pod Filter sizes and kept adding bends to a LS3 on an Engine Dyno to find if bends caused power loss. It's a good video worth watching - They did lose ~25hp from making an intake which had 3x90's and a 120 degree. They only lost maybe 1hp with a basic 90. I feel that by sealing up my airbox I have: 1) Created the same restriction a stock airbox would have. 2) Created a very convoluted set of intake 'pipes' by forcing all the air through the ducts. So I am pretty confident I'll be going full circle and have a huge hot air intake pod and actually see a benefit. The air does *not* stay hot once it gets flowing, aided by the ducts, and the pod can then pull air from anywhere. All the posts of yore talk about the stock airbox costing 10-15kw at 300kw+ but you know what? I f**king would very much like that 10-15kw and I remember my own pod filter in engine bay experiences. Turns out the GTT Reo and Headlight brackets really don't allow you to mount GTR items, no matter what the internet says. Various brackets have had to be made up to actually make it fit right for the front bar. Also some idiot mounted a 3L Accusump right where the bumper wants to go, so that has had to be 'relocated' To where, I am still not sure, but it's supposedly mounted in the pictures and I can't see it.
×
×
  • Create New...