Jump to content
SAU Community

Drive Through R33 Manual Box

HINGO
 Share

Recommended Posts

HINGO Contributor

HINGO

Posted
Posted (edited)

Hi, I've just put an R33 box onto the back of my RB30 (VL turbo) and have currently got just the yoke sitting in the back of the gear box (until I get my tailshaft built) to stop the oil from coming out, and with the car running and I pull the clutch out with the gearbox in neutral it actually spins.

Is this right/usual or is there something up?

So should there be any drive through the gearbox at all in neutral. My thinking was that there shouldtn be any what so ever. But I thought maybe there could be as long as the tailshaft is all connected up from box to diff (which would provide some form of resistance to keep it from spinning at all)

Need to know asap... Cheers

Edited by HINGO
Link to comment
https://www.sau.com.au/forums/topic/182551-drive-through-r33-manual-box/
Share on other sites
HINGO Contributor

HINGO

Posted
  • Author
Posted
its not engaged in a gear its just that without a gear selected everything still spins inside the box and with the oil in it its sort of like a viscous coupling. Completely normal.

Oh ok, makes sense. So the tailshaft normally being connected is enough to keep it still?

mattymagoo22 Community Regular

mattymagoo22

Posted
Posted

sorry mate cant help with the reverse switch but you could check it with a multimeter check resistance across two wires in and out of reverse i think the other switch is a neutral switch???

Even with tailshaft in if the car was jacked up and you started it in neutral you'd probably find that the rear wheels would begin to turn! far bit of friction in there huh!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Pac
      2020 Nissan Skyline 400R V37/Infiniti Q50 RS insurance in NSW

      By Pac · Posted

      Yeah they charge a little extra for mods , last year I noted no mods but I did have an exhaust fitted after that so  better to let them know cause these kinds of things can cause the policy to be void if you ever need to claim.
    • Tekitsune
      Upgrade an rb25neo

      By Tekitsune · Posted

      Hello, just just bought an 1999 enr34 with a stock rb25neo and I'm looking to upgrade the engine to 500whp I know some basic things but wondering if there are things I'll need to do to upgrade the stock block and all the bits and pieces to achieve this.
    • DatsunBanana
      Rear subframe stay bracket bolt removal issues

      By DatsunBanana · Posted

      Thanks everyone for the replies and suggestions. Got the seats out (hoping I could find some existing grommets but no such luck). By tapping and measuring etc. I could figure out where I could drill through if needed. But first I borrowed an inspection camera and managed to go through factory holes in the chassis rail and could see that the captive nut was holding steady which is why it could retighten. So it was indeed a stripped section of thread, so I applied downforce by levering the bolt head with a screwdriver and went slowly back and forth until it came out. Camera helped a lot cos I could monitor that the captive nut was holding tight. Now I just have one very seized main subframe nut to tackle 😅
    • Dose Pipe Sutututu
      Question about BoV on RB25DET NEO

      By Dose Pipe Sutututu · Posted

      BOVs do have a purpose, if you ever log pressure before and after the throttle body, you will see a spike pre throttle on lift off from a WOT condition. Enough to bend throttle blades / damage e-throttle motors or simple assist in blowing off cooler pipes. FWIW, the above on really applies to those running at least 2 bar of boost. OP shouldn't have an issue, on the other hand, here are some videos of my shit box over a decade ago with some succulent dose with the airbox on and off. That shit box is unrecognisable these days 🫠    
    • Yeetus
      Question about BoV on RB25DET NEO

      By Yeetus · Posted

      I've tried all different combinations of BOVs/ no BOV and stock bypass valves over the years, on gear changes the stock bypass valve seems to get the car back on boost quicker because in part the turbos wheel speed isn't being slowed down by reversion, although they have issues holding boost much over the stock setting. Most aftermarket BOVs you can adjust the spring, tighter will make it open later and close sooner, but in my experience it'll cause a bit of flutter at low load/rpm anyway. I've also got some input into this whole no bov causing turbo wear, never had an issue on any on my turbos HOWEVER, I got my R33 GTST with 200k kms on it, with from what I can see still has the original turbo, no lateral shaft play but has about 4-5mm of play in and out which to me seems like a worn thrust bearing from years (100-150k kms?) of turbo flutter running no bov, so maybe there is some truth to it in the long run. But that'll never stop me loving the Stutututu while I have the car.   OP just wants to know if he can run a atmo vented BOV with no major issues and the answer is YES, plenty of people do it, there's no harm in installing it and seeing how it runs before spending $$$ on an aftermarket ecu, last time I bought a Nistune it was $2400 for install and a tune , unsure of todays prices but you get me. Crazy money to spend just to fix the minor inconvenience of stalling that can be overcome by letting the revs come down to near idle before putting the clutch in or a little bit of throttle to avoid it. You're better off leaving the ecu and tune for after a bigger turbo/injectors have been installed to take full advantage of the tune and get your moneys worth.   Let OP have his Whoosh sound without trying to break his bank haha
×
×
  • Create New...