Jump to content
SAU Community

Recommended Posts

  • 4 weeks later...
why seperate the pistons from the block after you had the bores, bored and honed to suit the pistons? sorry but an unmachined block is better than one bored out to suit pistons that dont come with the block.

I had to get new rings made for the pistons anyway so the block was bored and honed to suit 87mm pistons and rings - this is what i was told would be done by the machinist so i would think they knew what they were doing when machining block for a rebuild.

sure i'm no expert but are you?

if you have questions you're welcome to enquire and i can refer you to my mechanic who has built many hypo RB26's and was in charge of the whole process. Even if it had to be re-honed thats only like $80/cylinder which i would negotiate on the already ridiculously low price

Link to comment
https://www.sau.com.au/forums/topic/183795-delete/page/2/#findComment-3569386
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'd ask the shop what they used and use that. Mixing coolants is sometimes OK, sometimes not, and you have know the details of each coolant to know whether it's a good idea or not.
    • Is it alright to top up with just another green coolant?
    • thanks GTSboy. My confusion at the moment is i am trying to locate the ignition, ECU battery power and the ECU negative The closest thing i can find is the for the S15 on Page 8 of the Wiring Specialties web page https://drive.google.com/file/d/0B9F33_M_GgENQnZ6STMxVmVNd1E/view?resourcekey=0-eZ4nNRwRoqa1qvKlWWHm8A I cannot find the same diagram for the R33 RB25DET Series 2 dash plug pin out.... Do you know what the Pins? or know where i can find the same pinout diagram for the RB dash plug? Thanks for the advice on the box... i like a 6 speed so might be on the lookout or the box now.. a topic of discussion for another post...
    • Will have a look at that. I cant see any leaks 
    • Put another overflow bottle (ie, a 1.25 coke bottle or similar) under the overflow hose and see if it is being pushed out there or if it is disappearing into the engine.
×
×
  • Create New...