Jump to content
SAU Community

Power Steering

Richo

By Richo,
in General Maintenance

 Share

Recommended Posts

Richo Mentor

Richo

Posted
Posted (edited)

Hi guys

Last week the power steering on my car decided to stop working, steering became quite heavy, so I went ahead and checked the usual suspects.....

- speedo is working

- belts are fine

- fluid is fine

So I thought "the pump", went to my local wreckers and got myself a new pump, installed that and to my surprise it didnt fix the problem, went back to the wreckers to ask for another pump, got that, went back home installed it.....nothing AGAIN :) .

So now Im thinking what are the chances that both these pumps were dead? I believe the problem may just be somewhere else, but dont know where to start looking now.

So if you guys can give me any ideas, that would be sweet, this is doing my head in :)

Cheers

Ric

Edited by Richo
Link to comment
https://www.sau.com.au/forums/topic/187267-power-steering/
Share on other sites
silman Rising Star

silman

Posted
Posted

Try searching under hicas problems, but if that fails here's my suggestion for the pump itself.

open up the pump and check the magnets inside, if you see any sign of wear inside the pump, then there is contamination somewhere in the entire power steering pump system. By changing pumps only you're actually causing the shavings to cycle through each pump you put on the car.

You could have shavings, cycling from the steering rack, through to the pump. Whilst you are there, your pump may have some type of pressure switch setup, and it may not be working properly. From what I remember when i checked mine on an R33 and R34 pump, there was a spring and ball bearing type setup that you can get to, to see if that area is releasing freely.

Link to comment
https://www.sau.com.au/forums/topic/187267-power-steering/#findComment-3381289
Share on other sites
Richo Mentor

Richo

Posted
  • Author
Posted

Thanks guys, ill have a look at the PRV (if I can find the thing) :( and the fuses and see how i go

FYI.. I looked under the car and the right hand side steering rack boot was completely destroyed, I had noticed that it was split a few months back, but now its totally open and perhaps letting alot of crap in to the system. Any way of flushing and cleaning the PS system , or is it a matter of getting a whole new rack???

Cheers

Ric

Link to comment
https://www.sau.com.au/forums/topic/187267-power-steering/#findComment-3382751
Share on other sites
Richo Mentor

Richo

Posted
  • Author
Posted

I found a blown fuse on the dash board, at least we are getting somewhere here. :(

Now does anybody know what this fuse controls? I just dont have access to a new fuse now, being public holiday and all.

Cross fingers thats the answer though.

post-18416-1191212005_thumb.jpg

Cheers

Ric

Link to comment
https://www.sau.com.au/forums/topic/187267-power-steering/#findComment-3382931
Share on other sites
BH_SLO32 Proficient

BH_SLO32

Posted
Posted
I found a blown fuse on the dash board, at least we are getting somewhere here. :(

Now does anybody know what this fuse controls? I just dont have access to a new fuse now, being public holiday and all.

Cross fingers thats the answer though.

post-18416-1191212005_thumb.jpg

Cheers

Ric

From memory it was a 15 or 20A fuse that blew in my bro-in-laws car. Looks very familiar. I noticed you have a 10A and 20A in the spare fuse holders. You may be able to try a 10A if it is a 15A that blew. At least to get you going until you get the correct one.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/187267-power-steering/#findComment-3382970
Share on other sites
Richo Mentor

Richo

Posted
  • Author
Posted (edited)

edit:

Ben mate, you were right on the money, the blown fuse on the loction shown on the pics is a 10A....now Im not sure whether this fuse is purely for the PS but I put on one of the spare 10A's on there and voila!! PS is sweet now!

Hope this helps any one in the future, check your fuses and go from there.

Thanks again Ben, and to the others for the suggestions :D

Ric

Edited by Richo
Link to comment
https://www.sau.com.au/forums/topic/187267-power-steering/#findComment-3383256
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      The car revs up through the gears much better/faster now, and fuel consumption doesn't really seem to have be affected either on a Hwy cruise, which wasn't expected  The FAB9 intake manifold has been problematic sourcing though, I've contacted Plasmaman to ask about their intake, which you can get different runner lengths spec'd, and, their different options for throttle bodies  The only real physical drawback with the Plasmaman intake is how to connect it to my current OEM style airbox, as FAB9 make a OEM style back half of the airbox to suit the larger diameter throttle body, and all that is required is a 30°bend silicone pipe to mate the throttle body to the airbox Car also goes in for some exhaust work in a week or so to fit the biggest resonator they can fit clearance wise in the front pipe to help remove some of the drone, there isn't alot of realestate under there, a rough guesstimation is it will only be about 3-400mm long and maybe 90-100mm diameter, and with a 60mm exhaust that doesn't leave alot of space for the internal volume of the resonator to do its thing I'm thinking I may need to bin the "high flow" 100 cell cat for something a bit more substantial, yeah, and restrictive, like a 200-400 cell, to help, but, I have ample room for a really large bodied cat to replace the current one which has around a 4" diameter body I may look around in the recycling bins and see if I can find a massive newish cat that was "replaced" with some new full exhaust system that the local exhaust shop in Western Sydney is doing
    • r32-25t
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By r32-25t · Posted

      www.rollracing.com.au tickets aren’t live yet 
    • Dose Pipe Sutututu
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By Dose Pipe Sutututu · Posted

      Hahah look at that smile 😂 Just like those ones on IG where they compare the husband in family photos vs husband going fishing lol. I don't think I'll participate this time, clutch isn't in and also the last time I went there were too many numpties on the cruise sessions. Nearly caused a few accidents holding up people and a few guys initiating massive kerb to kerb drifts with heaps of cars right behind them. Not to mention, there were guys on the track session using it as a power cruise session.
    • The Bogan
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By The Bogan · Posted

      Is there an actual website thingie for peoples who don't have Facebooks? Cheers
    • soviet_merlin
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By soviet_merlin · Posted

      All Jap Day is coming up again! 13th of July this year. Are you going? Tickets go on sale on Wednesday 6pm. Please let Quang know as well. https://m.facebook.com/photo.php?fbid=1163155775853542   I still get shit from my wife for this photo because it is the happiest she has ever seen me. And it's not with her, it's in someone else's car.   Quang's EVO is sick, but that rotary wagon flying past was absolutely bonkers.  
×
×
  • Create New...