Jump to content
SAU Community

Sold

benl1981
 Share

Recommended Posts

benl1981 Grand Master

benl1981

Posted
  • Author
Posted (edited)

Flows more than most of the Walbros, not sure about 040. Plus it is more reliable. People on here put in 15 year old GTR pumps into GTSTs as upgardes with no problems. This one is BRAND NEW.

Just have to hose clamp to the bracket. Wiring etc all the same.

Check out this:

http://www.stealth316.com/2-fuelpumpguide.htm#j4

Edited by benl1981
Link to comment
https://www.sau.com.au/forums/topic/191896-sold/#findComment-3453149
Share on other sites
666DAN Grand Master

666DAN

Posted
Posted

Not a direct fit for an R34, you just need a couple of hose clamps to attach it to the pump support frame, you also need to extend the fuel hose on the base so that it sits in the same position for the pickup sock (ie same angle and depth) it took me 30mins to do and works a treat! My tank can still run down as low as with the stock pump without problems...it's all in the sock placement.

Link to comment
https://www.sau.com.au/forums/topic/191896-sold/#findComment-3453607
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Looking for someone with a R34 front bar

      By GTSBoy · Posted

      That looks good, but I think you're going to need much beefier side skirts now.
    • GTSBoy
      Most women will agree that parking is the most taxing part of driving

      By GTSBoy · Posted

      They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • GTSBoy
      new 1.5 LSD issues/concerns

      By GTSBoy · Posted

      I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • GTSBoy
      M35 Brake caliper replacement

      By GTSBoy · Posted

      Define "starting to fail". Wy not just rebuild them?
    • GTSBoy
      S1 rb25/s14 starting problem

      By GTSBoy · Posted

      Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...