Jump to content
SAU Community

Recommended Posts

Wanting to get rid of the stock rear speakers in the r34 skyline. I have a set of 6x9's from my previous car that i want to replace the rear speakers with.

Anyone know if this is hard to achieve?

(know very little about car audio im afraid!)

Link to comment
https://www.sau.com.au/forums/topic/193594-6x9s/
Share on other sites

dude seriously I have been playin with car audio for maybe 12 or 13 yrs and to be honest I have never liked the sound from 6x9's. I am sure that there are some that sound good but if it were up to me I would be picking a pair of 6 inch splits every time. If you need more bass then add a 10 or 12 inch sub.The bass from 6x9's is never as good.It really depends on how much you want to spend.With the car you got I would go the best myself...I used Boston Accoustics and I swear by them..Precision power amps are so clean also...I got one for sale on Ebay at the moment but maybe too big for what you need.....cheers

Link to comment
https://www.sau.com.au/forums/topic/193594-6x9s/#findComment-3473638
Share on other sites

I have a 12" rockford sub from my old car sittin in my room (no amp tho) but im not sure if i wanna take the sub route?

The 6x9's i already have as well from way back (they are not too bad) and i just wanted to put them in for the mean time...anything beats the stock speakers i reckon.

Link to comment
https://www.sau.com.au/forums/topic/193594-6x9s/#findComment-3473793
Share on other sites

dude seriously I have been playin with car audio for maybe 12 or 13 yrs and to be honest I have never liked the sound from 6x9's. I am sure that there are some that sound good but if it were up to me I would be picking a pair of 6 inch splits every time. If you need more bass then add a 10 or 12 inch sub.The bass from 6x9's is never as good.It really depends on how much you want to spend.With the car you got I would go the best myself...I used Boston Accoustics and I swear by them..Precision power amps are so clean also...I got one for sale on Ebay at the moment but maybe too big for what you need.....cheers

so true, 6X9's are so overrated. and your need to spend a bit of money/time installing them to make them look good on the back parcel shelf, better of putting 6inch splits which will fit perfectly into the standard holes and will look and sound awesome

Link to comment
https://www.sau.com.au/forums/topic/193594-6x9s/#findComment-3482238
Share on other sites

6x9s won't get the power at real low frequencies a sub will hit but often because they're multi-voice they make a good midrange speaker.

First thing I think of people dodging 6x9s and going straight for 6"s and a sub is the asshole retarded salespeople in your common car audio stores. They get paid by commission you tools, of course they want to have you go the 6" + sub + amp route.

Like I said, 6x9s, not a replacement for a sub, but in my case better then what came with the car (nothing). Currently have two voice alpine 6" in my doors and a couple of pioneer 3 voice 6x9s on the shelf. A sub is on my list to do as there is a lack of power in the real low end, and probably a couple of tweeters for the real high end, but the 6x9s put out enough to make the rear window shake, and have a very nice spread of frequency response.

Fiddle with the headunit a bit and try and tune it to be even. Unless your music is actually heavy on the bass, you shouldn't tune it so it sounds like it. I know it tends to lean more towards the sound engineer idea but if you have a friend that has some studio monitors, go play a music track on them, listen for the way the sound responds in both low and high frequencies, then play the same music in your car and try and get it to sound similar to that to start with. After you've got this base point, make small tweaks to it as your personal preference, but try not to tune too far away from the base point.

Anyway, hope this helps. (Btw, 6x9s will fit in a R33 with MDF spacer quite easily, and if angled right, you can secure them using some of the stock holes. Your spacer only needs to be high enough to lift up the majority of the cone, the driver should still fit through the original hole.)

Edited by Hell Fire
Link to comment
https://www.sau.com.au/forums/topic/193594-6x9s/#findComment-3482679
Share on other sites

Hey thanks for all the responses thus far.

I guess i was going for the 6x9's as i already have them and they are quite decent quality. I also thought they would fit with no major problems or hassels.

I might just pick up a set of 6" splits for the back as apparently they will fit right in? I'll hold out for a few months untill i find a good amp and possibly new head unit.

so does anyone recommend any GOOD 6"(split) speakers that aren't overly expensive?

Link to comment
https://www.sau.com.au/forums/topic/193594-6x9s/#findComment-3483410
Share on other sites

Dont install 6x9's if your going to have a sub..

6x9's are designed to give you a little "punch" of bass.

If your putting in a sub.. this extra little bit of bass become irrelavent because you have a sub.

6x9's distort easier than 6" and 6" have much better sound quality.. AND you dont have to go through the effort of making 6x9's

thats my 2c

Link to comment
https://www.sau.com.au/forums/topic/193594-6x9s/#findComment-3483498
Share on other sites

Yer my intention was never to have a sub and 6x9's at the same time. I was going to put the 6x9's in cos like i said i already have them and i thought it would be a simple swap for the old speakers. I didnt want to go down the sub route at all...

however, now i will just probably sell my 6x9s and buy some 6" for the back as they will fit in with no hassels, will apparently give better sound and they look better :no:

Link to comment
https://www.sau.com.au/forums/topic/193594-6x9s/#findComment-3484476
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Pressure when IDLING, is meant to be 51PSi... So that amperage value needs to go up a fair chunk... I'd personally be factoring for more like 12amp at least on those runs, and at that point you need to hope the already there wiring doesn't drop you a volt or two, as that's a lot of fuel pressure flow drop off from 13.5 to 12V! Taking idle pressure of 51psi, means the pump will be drawing a MINIMUM of 9amps all the time based on your reading of the graph (3bar base, then allowing an extra 0.5bar for boost = roughly 51psi)
    • Hi all,  I am in the market for an R200 longnose diff out of a Z31 300ZX, or S12 RSX, DR30 skyline, or similar, in a 3.9 ratio.  Preferably a late model one with the M12 crownwheel bolts.  The only easy to find advert for one of these was my ad back in 2007 when I sold it on this forum.  I sold the diff as I had sold the car it goes to, but as it turns out, after 18 years I got the car back late last year, so now I'm looking for the diff !  If anyone knows where to find a longnose R200 LSD with the M12 crownwheel bolts, drop me a line at [email protected] - Bonus paid if soomeone comes up with the original diff (stranger things have happened !).  Cheers   Ben D    
    • Hi everyone, I used to post here a bit from 2004-2013, when I owned various Nissans, in particular my S12 RSX gazelle, which was sold in 2007.  As luck would have it, after an 18 year hiatus, the car found its way back to me last year, and over the past 11 months I have had the pleasure of restoring it with my kids.  One thing that I am after in particular is a 3.9 ratio R200 LSD for it.  I actually sold the one out of the car here back in 2007 , and it would be incredible if I could track down who I sold it to, so I can see how they have progressed over the years (and to be honest, to see whether I can get the diff back !).  Anyways, hi all and let me know "where are the R200 Longnose diffs all at these days ?  Cheers Ben D  
    • Arms will be the same as the G35 or 350Z, but as above, there was a change in the lower control arm where it connects to the ball joint.  That said, you can remove the ball joint cone from your old ball joints and fit them to the new ball joints.  To be honest, I didn't think the ball joints themselves were different. The main ball joint is a bit awkward to replace, you really need to remove the steering knuckle to press out the old one.  Some people have used tools to remove it in place, but it just seemed too hard to get to. If you are going to press out/in that ball joint, then you may as well just replace the bushings in the LCA and the compression rod.  You can buy the compression rod bushing from Nissan, but the LCA bushes, you will need to go aftermarket. Much cheaper than buying the whole arm.
    • Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
×
×
  • Create New...