Jump to content
SAU Community

Recommended Posts

Hi all :)

I have finally decided to introduce myself as I've just purchased another Skyline, however this one was more worthy of signing up with :D

My name is Juliette and I live in Croydon, VIC. To say I'm obsessed with cars would be an understatement.

After the write-off of my beloved Grey R31 Skyline S2 Ti Sedan last year, and subsequently buying and relying on a nugget of a White R31 Skyline S3 Executive Sedan (which I'll still unfortunately have for a few more months at least) I decided I needed something a bit nicer for times when my N15 Pulsar is off the road, and for daily duties such as driving to work.

This is my recently purchased Pearl White R34 Skyline GT-T:

66.jpg

69.jpg

70.jpg

75.jpg

83.jpg

84.jpg

86.jpg

54.jpg

52.jpg

45.jpg

65.jpg

It is currently sitting on the docks in Kobe, Japan while everything is being finalised. All going well, I should have it complianced and on the road in the next couple of months. I have ~90x hi-res 5.0mb photos of it, so I'm quite across the car already.

It is an auction grade 4; the paint is above average for the age of the car, it'll just need a minor crack in one side skirt fixed and two small indentations were the spoiler was removed and the holes welded fixed - and only because I am fussy. It'll get a good professional polish and the engine bay steam cleaned (this is one area that is filthy.) The interior is immaculate, barely 1 or two marks anywhere. It has just passed 100,000km and has had it's major service with the timing belt changed. I love the wheels and factory bodykit, so they'll stay. It also has a 3" exhaust, turbo timer and DVD player with navigation (unsure if this will work in Australia, maybe someone can shed some light?) It appears to be slightly lowered but I'm not sure. Otherwise, it is completely stock and appears to be in well above average condition for a 10-year old car. I picked it up for a very good price.

So Skyline number 3 makes it three white 4-door Nissans that I own, my partner also owns a white S15. We are a white Nissan family haha :D

Here are a couple of photos of my other cars (the specs are linked to above):

My N15, my pride and joy:

2397_01.jpg

side_day.jpg

2397_06.jpg

My old R31, RIP:

IMG_0870.jpg

skyline2.jpg

skyline3.jpg

My current nugget R31:

P5220001.jpg

P5220003.jpg

I look forward to hanging around.

Oh, and I need to borrow a stock R34 Sedan exhaust in VIC if anyone can help :P

Edited by llama_au
  • Replies 110
  • Created
  • Last Reply

Top Posters In This Topic

good to have another overly obsessed car fanatic on the forum.... so im guessing you sleep out the front of ur car in a sleeping bag to make sure no one steals it too ??? :ermm: jokes. nice panda pulsar wouldnt mind an engine bay shot tho!!!!

congrats on the new purchase of ur 34. never seen those rims on a 34... they look better on a BNR32:p

enjoy your time on SAU. alotta keyboard warriors but also a lotta real fanatics that really have alot of knowledge to share!

safe boostin!

jenkies

Cheers Jenkies. The rims are definitely staying, they're hawt :ermm:

Here's an outdated shot of the engine bay of the Pulsar:

PB130087.jpg

And this is why it's currently in the workshop:

P1230003.jpg

Disco Potato (GT28RS) with .64 housing, CES split dump pipe, CES Metal Substrate cat, 740cc Nismo injectors, a re-tune and Nismo long wheel studs all getting installed.

Full specs are here but they're changing soon with the addition of the above mods:

http://members.pulsar.org.au/profiledisplay.php?ID=2397

Torque steer is just a fact of life in a FWD, if you're prepared for it you can control it. If someone was to jump into my car and floor it, they probably would get the fright of their life and end up making close acquaintance with the nearest car/traffic light :lol:

Actually, it's bad but it's not terrible. I have a VLSD and coilovers so they help a little. It's awesome fun to drive, I'm aiming for 180-200fwkw and mid-12's :ermm: Hence buying the R34 as the comfortable cruiser, the N15 is my project/track/drag/weekend warrior.

:ermm: if ur 34 was manual.... once u drove it we both know that it would become your track/drag/competition car:P even as an auto it should still fly! = pulsar becoming daily hahahah

GTI-R rear wheel drive setup and gearbox in pulsar??? just a thought it was done here in adelaide to a sedan.

The Pulsar isn't comfortable enough for a daily. It's impractical, loud and obnoxious. I know it's a little backwards but the Pulsar is the occasional fun car, the R34 will be comfortable and more reliable. Hence I'll leave it mostly stock and just enjoy it for what it is.

And no to AWD'ing the Pulsar. There's 3 AWD N14's in SA I that I know of (N14 shells with a GTi-R RNN14 chassis and drivetrain.) One's currently for sale.

It wasn't done to an N15 in SA. An RNN14 chassis with an N15 shell wouldn't work. I know of the project you're referring to though. A wrecker imported a 1.5L AWD Diesel N15 with the hopes of transplanting the driveline into an ADM Pulsar. They gave up on the idea as the drivetrain was weak as butter...it was designed for a 1.5L Diesel after all. You could have never road registered it either :ermm:

FWD is fun though.

I have the best of both worlds. A FWD and a RWD.

i really like the 34 but whats the deal with the pulsar? i don't understand it

its none of my business and i know everyone likes different things but still i don't see how you can prefer a riced up pulsar to a sports inspired skyline.

i really like the 34 but whats the deal with the pulsar? i don't understand it

its none of my business and i know everyone likes different things but still i don't see how you can prefer a riced up pulsar to a sports inspired skyline.

Like you said, each to their own. I wouldn't expect people to like the N15 more than the R34, this is a Skyline forum after all :ermm:

The N15 was my first car, and I'm extremely attached to it. I bought it stock and poured a lot of time, money and effort into in over the past 5 years.

The Pulsar is one of a kind, there's no other SR20DET Auto Pulsars in the country. I could also count the number of SR20DET N15 Sedans in the country on both hands. It's unique, even if it's no-one else's cup of tea.

It's quick, it handles well and I'm happy with how it looks. There's nothing ricey about it when it'll be running 7 seconds faster down the quarter mile than it did stock. The R34 could never be 7 seconds faster than it is now :P

Like you said, each to their own. I wouldn't expect people to like the N15 more than the R34, this is a Skyline forum after all :ermm:

The N15 was my first car, and I'm extremely attached to it. I bought it stock and poured a lot of time, money and effort into in over the past 5 years.

okay thats fair enough....

The Pulsar is one of a kind, there's no other SR20DET Auto Pulsars in the country. I could also count the number of SR20DET N15 Sedans in the country on both hands. It's unique, even if it's no-one else's cup of tea.

there is a very good reason why you have the only one.

It's quick, it handles well and I'm happy with how it looks. There's nothing ricey about it when it'll be running 7 seconds faster down the quarter mile than it did stock. The R34 could never be 7 seconds faster than it is now :P

my interpretation of rice is trying to make something it is not.

FWD is fun though.

I have the best of both worlds. A FWD and a RWD.

hehehe i know what u mean my first car was an ET pulsar... fairly stable for the hills for what it was and how old it was.

r34gtt are very stylish and i can see why you would keep one stockish for your daily.... comfortable ride with a bit of sportyness(dont think its a word) but naa good on you and hopefully run into you on the forums again. as for your pulsar... mod the shit thru it and get some records :ermm:

as for now im off for aust day celebrations!!

HAPPY AUSTRALIA DAY!!! have a good night/long weekend!!

  • 3 weeks later...

haha yeah, go the '31's. My grey girl was immaculate, I really wish I still had her. So comfy and lounge-like, you could fall alseep very easily driving it :thanks: It had the most awesome 80's pimp blue interior and buttons galore.

  • 3 weeks later...
  • 1 month later...

I got to drive it for a whole 2km to my house today. It was lovely for those two km's though. And called RACV to replace the battery, it didn't even have enough charge to make the starter motor click. All replaced and running, pity I can't drive it until mid next week, except to put fuel in it and wash it tomorrow :D Booked in for the rego inspection on Wednesday, compliance went well - just took a little longer than I expected.

First impressions; the driver's area is smaller than the Pulsar and it has interesting viewing angles...I'll need to get used to them. It beeps in reverse...hehe. The DVD screen comes out every time you turn on the ignition and all the manuals are in Japanese...grrrr. They left the flare in the car...yay :D I didn't find anything else of interest. The engine bay is so filthy you can't even see that the car is white underneath all of that. It otherwise looks very neat and has little Japanese service stickers stuck to random parts in the engine bay. The interior is absolutely immaculate, the boot looks like it's never carried anything in it's life. The only things I'm disappointed about are the some panels on the rear end aren't even close to the stock colour. It appears that the tail lights, bootlid, rear pods and rear bar have all been sprayed independently and none even match each other let alone the rest of the car. That annoys me so I'll probably fix it. I have to respray the bootlid anyway to get rid of two rust bubbles where the spoiler holes were welded. The rear pods are also falling off...but I knew that.

It just has effortless power and you don't even feel the Auto change gears. I heart it so much :blink:

Firstly...I must start these pictures off by excusing how dirty the car is. I'm imagining it's around 1 years accumulated dust, salt, etc. The wheels and exhaust on it are the compliance items, they're not staying.

P4040002.jpg

P4040003.jpg

P4040008.jpg

P4040009.jpg

Sick carbon fibre pillar stickers (hmmm :P) and uber-dark tints...with a comparison to the fronts:

P4040012.jpg

Proof of how dirty it is:

P4040004.jpg

P4040006.jpg

P4040005.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I got a full sheet set of OEM copied stickers to replace all the faded engine bay ones, great quality too.  Came from England. Someone like that should be able to to make u up what u want so long as u have a quality image to show them 🤷🏻‍♂️
    • Did this end up working? Did you take some pictures?
    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
×
×
  • Create New...