Jump to content
SAU Community

Recommended Posts

  • Replies 110
  • Created
  • Last Reply

Top Posters In This Topic

It feels like a clutch pedal :blink:

Good news. The box is fixed and it wasn't something massive. The circlip and spring came off the end of the shaft and planted themselves elsewhere in the gearbox. The shaft now has a new circlip and a deeper groove machined to sit in to ensure it's not going to wander out again.

I want to say thanks to PAR for all their assistance and quick turnaround in resolving the issue ;)

It may arrive in time to be installed for the weekend, otherwise it should be back on the road early next week.

lol, I won't be there, at least not driving. Had my third drive tonight, it's going to take a very long time for me to perfect driving manual let alone driving it hard. Excuse the fact I've had my license 7 years, I'm pretty much learning to drive all over again.

  • 2 weeks later...

P1010364.jpg

183.3fwkw. Not quite as much as I was expecting but we think a few things are restricting it a little (intake and exhaust), boost drops off to wastegate boost pretty early on. O2 sensor hasn't been sorted yet so it's been tuned without one again until that's sorted. The entire loom section for the O2 sensor has been re-wired so it'll at least work once we get it in. Also split a CV boot on the dyno, messy!

If anyone is interested in reading a little bit of my story I did an interview with car blog Obsessive Compulsive Tuning Cars:

Part 1:

http://obsessivecompulsivetuningcars.com/2...ve-for-her-car/

Part 2 to follow.

  • 2 weeks later...
  • 2 weeks later...
  • 3 weeks later...

Wow .. I learn't on manual, have only owned manual cars - I don't think I've driven an automatic more than maybe 30 minutes in my driving life. I've taught people to drive manual, but I honestly can't even imagine trying to learn to drive manual after mostly only ever having driven auto... good luck with it :) I think it will only improve your understanding of cars and handling - which I think is what you want to do :)

You're imagining right, it's hard. Especially since the car hasn't been running since the tune and I've got no manual cars to learn it at the moment. It's a very frustrating thing, because I can drive well in an automatic, I can drive fast and have done a fair bit of track work in an automatic and I'd say I was reasonably good at is, but this is like trying to learn to drive all over again after 8 years of having my license. I'll get there eventually but it's going to take me a long time.

Oh...and even with heavy duty clutches its not too different.

I had been on my manual license my about a year when I got the Ceffy with a heavy duty clutch, I stalled 3 times on the day I got it, and once after that reversing up my gravel driveway and that was it...When I jump in mates' cars with heavy clutches I struggle a bit, because the point of engagement is almost always different, as is stiffness, but again, bit of practice and you're all good.

  • 3 weeks later...

Woohoo, I has the Pulsar back. The problems:

  • Throttle was adjusted completely shut. No idea who on earth did that. This was the cause of the car trying to stall/stalling while backing off throttle and the cause of the rough idle.
  • Tune was using the wrong base image file - from an N14. This was causing the overfueling. It now makes 13fwkw more on the same boost - 196.2fwkw, shitloads more torque (617nm according to the dyno lol), the turbo spools much earlier and it makes much more power through the midrange. The hesitation at 4,500rpm is gone. It's quite insane to drive.
  • Hot start enrichment had too much fuel. This was the cause of the car stalling every time it was started warm.

scan0001.jpg

This tune was on 16PSI, previous tune on 17PSI. More power with less boost :(

This will go in down the track when I have an O2 sensor (daughterboard with O2 sensor tune):

tune_board.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Did this end up working? Did you take some pictures?
    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
×
×
  • Create New...