Jump to content
SAU Community

Recommended Posts

Hi guys as the topic says im selling a 2000 model wrx motor, computer, box and a set of front and rear sti diffs and half shafts.

Motor: Standard internals bigger evo 3 turbo with custom rear housing(not sure of exact sizes).

Motor also comes with custom cooler and piping all tig wlded by hand, and a front/ dump pipe and cat.

The previouse owner claimed 75,000 k's when my brother got the car. And he did another 10,000 roughly.

When removed it was perfect.

Computer: The computer is a microtech LTX-8 and hand controler. The computer is tuned for a wrx running 16 LBS daily or 18LBS for more fun. It will also come with a wiring loom for a wrx and 4 bosch coil packs. This computer can be re-tuned but only for a four cylinder.

Box: Standard 2000 model 5 speed box. Starting to get a bit tight into 5th.

Diffs: From what the previous owner told us they are sti diffs and half shafts.

Price: $4500 for the lot.

Or $4000 with out the computer.

I will seperate parts if the price is right

.

The motor is not currently in a car. It was removed as my brother got picked up by the cops for no engineers report in his rs liberty.

We only removed the parts to get rid of the defect. But the car has now sold hence the sale of the parts.

With this combo and a fuel pump you should be able to run a very low 12 if not 11.

My location is melbourne s/e suburbs. Pick up is prefered but if you organise a courier that would be fine.

Call me on 0411 797 868. My name is Aaron.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • lol the 2nd one boss, thank you for pointing this out. I feel as i spend more time here this intro message is some thing i will always make me laugh and shake my head at. Perfect Intro:  I have the vehicle  
    • R34DE as in R34 with an RB25DE? So did you get this? Or you planning to?  I'm not really sure what you're saying. 
    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
×
×
  • Create New...