Jump to content
SAU Community

Recommended Posts

HP COMPAQ NC6000 PRICE DROPPED $490

comes with original hp carry case, charger etc, in very good condition perfect working condition can inspect. selling due to work giving me a laptop

Pentium M 1.7 Ghz

Installed Memory 512 MB (DDR SDRAM)

Hard Drive 60 GB IDE

Display 14.10 in. XGA TFT LCD

Motherboard

Bus Speed 400 MHz

CD / DVD Type DVD Combo

Optical Drive Read Speed 10x (DVD) • 24x (CD)

Display Size 14.10 in.

Display Max. Resolution 1024 x 768

Video

Installed Video Memory 32 MB

External Video Resolution 1600 x 1200

Audio

Audio Output Type Headphones - Sound card

Operating System

Platform PC

Technical Features

Input Method Keyboard - Touchpad - Trackpoint

Networking

Networking Type Integrated Network Card - Integrated Wireless LAN

Data Link Protocol Ethernet - Fast Ethernet - Gigabit Ethernet - IEEE 802.11a/b/g

PRICE DROPPED $490 FIRM

$590 may swap for somthing of interest, but will prefer cash and thats worth somthing will post aus wide im in melbourne northern suburbs

call 0401267277

NC6000.jpg

Edited by hiboostgtr
Link to comment
https://www.sau.com.au/forums/topic/205879-hewlet-packard-compaq-laptop-cheap/
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
×
×
  • Create New...